Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    Apr 2015
    Reputation
    10
    Posts
    5

    980GTX Poseidon's in SLI - bridge/fitting solutions?

    Does anyone have any good ideas for bridging the water cooling fittings when using 2 Poseidon 980's in SLI? With custom blocks the manufacturers all have nice slick acetel bridges available. Seems like the only option here is 2 90" elbows and a short length of tubing as a bridge.

    If anyone is running this config, can you tell me the rough distance between the fittings on the two cards? (i.e., the distance straight across from the connector-edge fitting on card one to the connector-edge fitting on card two and then the distance from power-connector side fitting on card one to the connector-edge fitting on card two (the diagonal))

  2. #2
    New ROGer Array
    Join Date
    Jul 2014
    Reputation
    10
    Posts
    3

    If you have 10-12mm rigid tube you can buy 4 piece (1x GPU1 In, 1x GPU1 Out, 1x GPU2 In, 1x GPU2 Out) this fitting; http://www.performance-pcs.com/bitsp...k-adapter.html

  3. #3
    ROG Member Array
    Join Date
    Apr 2015
    Reputation
    10
    Posts
    5

    Thanks, I'll take a look!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •