Results 1 to 3 of 3
  1. #1
    New ROGer Array Montdj PC Specs
    Montdj PC Specs
    MotherboardAsus Maximus VII Formula
    ProcessorIntel i7 4790k
    Memory (part number)32gb Corsair
    Graphics Card #1EVGA GTX 980 sc
    Graphics Card #2EVGA GTX 980 sc
    MonitorAsus ROG Swift PG278Q
    Storage #1Samsung 850 Evo 240gb
    Storage #2Samsung 850 Evo 240gb
    CPU CoolerCustom Water Loop
    Case900D
    Power SupplyCorsair AX860I
    Keyboard Corsair K70
    Mouse Logitech G502
    Headset Tiamat 7.1
    OS Windows 8.1

    Join Date
    May 2015
    Reputation
    10
    Posts
    3

    [Build Log] Project Outta Control

    Hello Everyone!!

    This is my first build log here. I hope all will enjoy and please input is always encouraged.

    I will be using some of the parts from a recent build but most will be bought new. Here are a couple pics from that.





    This build I am going to be using the 900D case and full water cooling. I have been wanting to use this case for a full water cooling build since I first seen it a couple years ago. Anyway here is the parts list so far.

    Case: Corsair 900D
    CPU Intel i7 4790k
    MB Asus Z97 Maximus VII Formula
    Ram 32GB Corsair Dominator Platinum 2400MHz
    GPU EVGA 980GTX x2
    SSD TBD
    PSU TBD Think AX1200I but running out of money fast

    I know some of you are going why Z97 and not a X99 setup well a couple reasons. First I am waiting for the new chips in a couple months. Second I already have the chip and last well price right now. Trying to fit alot of things into my budget.

    I have also orders a couple of Coldzeros plates for the 900D. I think I will be going with a white a black theme with this one. Not sure yet but will decide soon

    Here is the water cooling gear:

    Pump EK pump\res combo with a 250mm tube.
    GPU Blocks EK-FC980 x2
    CPU Block EK Supremacy MX
    Rad #1 EK CoolStream XTC 420
    Rad #2 EK CoolStream XTX 480

    The rest is a mix of bitspower and monsoon fitting and monsoon ridged pipe. Well here is a couple pics of the case.






  2. #2
    New ROGer Array Montdj PC Specs
    Montdj PC Specs
    MotherboardAsus Maximus VII Formula
    ProcessorIntel i7 4790k
    Memory (part number)32gb Corsair
    Graphics Card #1EVGA GTX 980 sc
    Graphics Card #2EVGA GTX 980 sc
    MonitorAsus ROG Swift PG278Q
    Storage #1Samsung 850 Evo 240gb
    Storage #2Samsung 850 Evo 240gb
    CPU CoolerCustom Water Loop
    Case900D
    Power SupplyCorsair AX860I
    Keyboard Corsair K70
    Mouse Logitech G502
    Headset Tiamat 7.1
    OS Windows 8.1

    Join Date
    May 2015
    Reputation
    10
    Posts
    3

    Well made a little progress last night. Got the case stripped down and starting painting some parts. Should be getting the motherboard and misc things today.
    Well on with the pics.

    Full view of the case


    Inside view.




    The start of the painting








    and a pile of some of the parts

  3. #3
    New ROGer Array Montdj PC Specs
    Montdj PC Specs
    MotherboardAsus Maximus VII Formula
    ProcessorIntel i7 4790k
    Memory (part number)32gb Corsair
    Graphics Card #1EVGA GTX 980 sc
    Graphics Card #2EVGA GTX 980 sc
    MonitorAsus ROG Swift PG278Q
    Storage #1Samsung 850 Evo 240gb
    Storage #2Samsung 850 Evo 240gb
    CPU CoolerCustom Water Loop
    Case900D
    Power SupplyCorsair AX860I
    Keyboard Corsair K70
    Mouse Logitech G502
    Headset Tiamat 7.1
    OS Windows 8.1

    Join Date
    May 2015
    Reputation
    10
    Posts
    3

    Sorry it's been a while since I updated this thread. Work has kept me pretty busy and most of the progress has been late at night.

    Well have got a lot done working on it here and there. Got the plates from ColdZero and that was the last of the parts I needed.

    Started to bend tubing and didnt like the way the Monsoon ends were fitting. I ended up ordering Bitspower fittings for everything, Also ended up going with 10mm/12mm pipe.

    Well here are the pics with everything up to date. Let me know what you all think.



    Needed to make a extension for the 2 ssd


    Here it is all complete


    Needed a place to mount the HD.


    Starting to see the wat everything will fit together


    Right before I decide to switch to bitspower fittings


    Some plumbing and starting to leak test


    A better view of where the HD is mounted

    I have done the final fill last night and finished wiring it today. Everything has turned out the way I was hoping. I will be posting more pics of the final build later tonight or tomorrow.

    Thanks for Looking.
    Montdj

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •