Results 1 to 2 of 2
  1. #1
    ROG Enthusiast Array Goggle Eye PC Specs
    Goggle Eye PC Specs
    MotherboardRampage lV Black Edition
    ProcessorI7 4930K
    Memory (part number)F3-17000CL9Q-16GBZH
    Graphics Card #1GTX 780 S.C.
    Graphics Card #2GTX 780 S.C.
    Sound CardOn Board
    MonitorLG Ultra Wide 34 in BenQ 24 IN
    Storage #12 x Samsung Pro 2TBs Each
    Storage #22 x Intel 540 480 GBs Each
    CPU CoolerNH-D14
    CaseCase Labs
    Power SupplyCorsair AX 1500w I
    Keyboard Ducky 908 G2
    Mouse Logitech G3
    Headset Sennheiser HD 650
    Mouse Pad None
    OS 7 Ultimate 64 Bit
    Network RouterNA

    Join Date
    Apr 2011
    Reputation
    10
    Posts
    63

    4.4 GHz Prime 95 Stress Test Hardware Failure Please Help

    Please Need some help figuring out the issue after running Prime95. Power Supply, Mother Board or CPU Damaged?

    Asus Rampage 4 Black Edition
    CPU I7 4930K 4.4 Ghz
    Heat Sink Noctua NH-D14
    Memory G-Skill 2133 Mhz 9-11-10-28-2 1.650v
    PSU: Corsair 1200w Gold Edition

    BIOS Settings Default except for the following. Been following Asus Guide for over clocking. Basic O.C. at 4.4 Ghz.

    AI OC Tuner Manual, memory set per mem specs. BCLK 100,, Strap 100, SYNC All Cores 44, Digi + CPU Load Line Calibration Medium, CPU Current Capabilities 120%. CPU V-Core Voltage Manual, CPU V-Core Manual Voltage 1.300v. No other changes made in BIOS. In order to prevent any errors with P95 for 1 hour 1.30v V-Core is required. If V-Core is left on Auto V-Core Voltage 1.342v. Past the cooling capabilities of the NH-D14 to stay at 80c or less.

    Real Temp Max Temp 79c, CPU-Z 1.280v, HW Monitor VID 1.256v

    Prime 95 ran for 22 hours and 45 minutes system booted to BIOS.

    Power Supply Surges Detected During The Previous Power On. Asus Anti-Surge Was Triggered To Protect System From Unstable Power Supply Unit.

    BIOS set back to Defualt settings.

    Following BIOS Changes system will boot no issues.

    Changes to BIOS memory specs only. 9-11-10-28-2 Voltage 1.65v. 2133 Mhz Boot to windows the system auto back to BIOS same error related to Power Supply.

    Replaced the Corsair 1200w Power Supply 8 weeks ago.

    Mother Board Damaged, CPU IMC controller Damaged or Power Supply? Ran Mem Test on the memory no issues. Been having a lot of troubke getting a 4.4 Ghz O.C. with Load Line calibration set to Medium at 120 Percent. Not recommended for a 24/7 O.C. to run any higher LLC.

    Thank You
    Larry
    CaseLabs Magnum 8
    Asus Rampage 4 Black Edition
    I7 4930K 4.5GHz
    Noctua NH D14
    G-Skill Z Series 2133 MHz 16 Gb
    2x GTX 780 S.C.
    PSU Corsair AX 1500 I
    2 x Samsung 850 Pro 2 Tbs Each
    2 x Intel 730 Series 480 GBs Each
    Sound On Board

  2. #2
    ROG Enthusiast Array Goggle Eye PC Specs
    Goggle Eye PC Specs
    MotherboardRampage lV Black Edition
    ProcessorI7 4930K
    Memory (part number)F3-17000CL9Q-16GBZH
    Graphics Card #1GTX 780 S.C.
    Graphics Card #2GTX 780 S.C.
    Sound CardOn Board
    MonitorLG Ultra Wide 34 in BenQ 24 IN
    Storage #12 x Samsung Pro 2TBs Each
    Storage #22 x Intel 540 480 GBs Each
    CPU CoolerNH-D14
    CaseCase Labs
    Power SupplyCorsair AX 1500w I
    Keyboard Ducky 908 G2
    Mouse Logitech G3
    Headset Sennheiser HD 650
    Mouse Pad None
    OS 7 Ultimate 64 Bit
    Network RouterNA

    Join Date
    Apr 2011
    Reputation
    10
    Posts
    63

    Sorry meant to say it is not recommended to go over Medium to High or Ultra High LLC for 24/7 O.C.. per my understanding.


    http://rog.asus.com/forum/showthread...untry=&status=

    And

    http://www.gskill.us/forum/showthread.php?p=74288
    CaseLabs Magnum 8
    Asus Rampage 4 Black Edition
    I7 4930K 4.5GHz
    Noctua NH D14
    G-Skill Z Series 2133 MHz 16 Gb
    2x GTX 780 S.C.
    PSU Corsair AX 1500 I
    2 x Samsung 850 Pro 2 Tbs Each
    2 x Intel 730 Series 480 GBs Each
    Sound On Board

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •