~~ Simplicity ~~ EK Vulture build

[pcjunkie209]

Hello everyone! It has been a long time since my last worklog. So what better way to start one with EK at the Asus ROG forums!! Ek contacted me to join this competition they are having with the Vulture case and of course I was all in! :thumb: I have my work cut out for me after seeing some of the builds that are progressing along nicely. There is some great talent involved in this comp and I am anxious to get going on my build now that I have some breathing room. ( Just finished a bunch of clients builds that had short deadlines.)

For my build I will do what I do best a super clean build. Being that most have a very unique look already I'll keep mine simple. I will be incorporating something new into this build that I haven't tried before, but more about that later. Lets check out the parts and case.













I would like to thank the following sponsors and especially EK!!






As to spec I will be running the following -

Intel i7 4790k
Asus Maximus VI Impact
Nvidia Geforce GTX980 ( May change)
Cosair Dominator Platinum 2133mhz 16gb kit
Corsair Neutron XT 480gb x 2 in raid 0
Corsair AX760i psu
Silverstone 8x DVD slotload



Originally I had 1 x 240gb but decided to go with 2 x 480gb so I can use for lan parties.



Ok so now some awesome goodness from EK and the DVD drive lol -













Stay tuned for another update shortly. The case is already getting some color!

[pcjunkie209]

Wow you guys are a hard group to get a comment out of. Alrighty! How about an update? Long overdue. So I got the case back from powder coating and I must say it looks wonderful!












Started on the block install as well.






Ram block will be changed once I get the CSQ one buffed out.




I'm working on wcing layout now so hopefully another update before end of weekend. Thanks for looking.

[pcjunkie209]

Wouldn't let me post all the pics lol...

Wait for it............ LOL






Finishing touches I added the Limited edition badge back on to the case.




Well that wraps it up for now. Thank you for checking out my worklog. I'm gonna go take this build for a spin!! Until next time..................

[pcjunkie209]

Busy busy busy!! Leave for Taiwan today and when I get back I'll be moving to my new shop. Ok so on with the build.

This will be my Final set of pics and there are a lot, so excuse the picture spam. LOL. I may take some better final pics at a later date maybe after I'm back.




You'll notice the 90's on all bends in the next couple pics. This was a new approach for me since I've always bent my tubes. But it didn't look right in some areas so I reverted back to some bends.














I'm not much for words tonite. I think the pics speak for themselves. Here's where it gets fun.

[chrsplmr]

Thank You Junkie ... Outstanding as usual .. hmmmm .. or is it Unusually Outstanding as usual ?? Flawless.

Best of Luck in Taiwan and with your new shop ... can't wait until 'next'. .c.

[Antronman]

c and Myk back at the same time???

What next? Viz goes on a 1000 post spree?

[chrsplmr]

c and Myk back at the same time???
What next? Viz goes on a 1000 post spree?

brother A - Without offense I find your comment off topic, off base and even disrespectful to the OP.
PCJ is one of the top most dedicated Modders that continues to thrill us with his mastery. I'm sure you see my point. .c.