Results 1 to 1 of 1
-
05-15-2015 02:08 PM #1
ALELOCOOO PC Specs Motherboard Asus Rampage V Extreme Processor 5960x Memory (part number) Mushking 2133 64GB Graphics Card #1 Radeon 295x2 Graphics Card #2 Radeon 295x2 Storage #1 Samsung EVO 850 1TB Storage #2 Samsung EVO 850 1TB CPU Cooler Corsair H100 Power Supply Corsair AXi 1500w
- Join Date
- May 2015
- Reputation
- 10
- Posts
- 7
Asus X99 Deluxe RAM Slot B1 Broken ?
Hi.
I got a brand new Asus X99 Deluxe, along with a i7 5960x and 64gb of Mushkin Blackline ram (this one http://www.ebay.com/itm/Mushkin-Blac...item20f59e7532 ). The speed says 2800, but i think thats only with XMP activated, without it its 2133.
Even though this brand is not listed as supported, works fine except for this:
The problem is, when i installed all the RAM, only 48 GB were detected, then i realized that CPU Z and Aida were able to see 56 GBs of RAM. Then i realized that the problem was with the slot B1. The slot B2 seems like its working, but since the B1 is not, the other slot can't be used.
I tried disabling XMP, setting the DRAM voltage to 1.3 isntead of 1.2, putting other rams on that slot, but nothing worked.
Also, i found this thread http://rog.asus.com/forum/showthread...t-XMP-for-s**t , where the user SkiMountaineer states that he's having an issue with this sam RAM slot (on another Asus X99 motherboard but still).
Here's a screencap of the info that AIDA64 shows.
This is with the ram on Slot B1 installed. Noticed how it doesnt show up.
http://i.imgur.com/VmXW25f.jpg
Would you reccommend setting the DRAM Voltage value for Channels A-B further than 1.3v? I don't want to burn anything : v.
Any input is appreciated.Last edited by ALELOCOOO; 05-15-2015 at 03:17 PM.