Results 1 to 2 of 2
  1. #1
    ROG Enthusiast Array
    Join Date
    Dec 2013

    CPU Fan Error on R4BE Boot Screen

    I installed 3 new fans, 2 WPM fans for a Corsair H110 CPU radiator and the other a case fan for exhaust im not sure which is causing the message "CPU fan error! Press F1 to run setup" (maybe the H110 pump on the CPU header?) I get it when I boot the PC at any time and I press F1 to end up in the BIOS where I just exit the BIOS without saving to start Windows, Im using a Rampage 4 black edition motherboard and Noctua fans, I installed the PWM fans on a 4 pin header and the case fan is also on a 4 pin header too is this a BIOS setting not set correctly?

  2. #2
    ROG Guru: Gold Belt Array Menthol PC Specs
    Menthol PC Specs
    MotherboardM 10 Apex / XI gene
    Processor8700K / 9900K
    Memory (part number)2x8 Gskill Trident Z 4266/2x2x8 Gskill Trident Z 4500
    Graphics Card #1RTX 2080ti / GTX 1060
    Sound CardSoundBlaster Ae5 / Onboard
    MonitorBENQ 32" 4K
    Storage #1Intel 900p 480GB/Samsung 960 Pro 1TB
    Storage #2Intel 750 1.2TB/Plextor 1 TB 2X 950 Pro
    CPU CoolerCorsair H150i AIO / H1110i
    CaseCorsair 740 ? Lian Li Air
    Power SupplyCorsair AX 1200i / AX 1200i
    Keyboard Corsair
    Mouse ASUS Strix
    Headset HyperX Cloud Alpha
    Mouse Pad ASUS
    Headset/Speakers Logitech Z906
    OS 10 X64 Pro
    Network RouterVerizon Fios
    Accessory #1 Intel Wifi BT pcie card
    Accessory #2 Red Bull
    Accessory #3 English Breakfast Tea
    Menthol's Avatar
    Join Date
    Jan 2012

    First the header your pump is on should be set to disabled in the bios so the pump runs at 100% all the time, secondly you can see what the minimum speed the fans are running in the bios and the speed that the alarm triggers needs to be less than the minimum the fan runs at

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts