Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Laptop Asus G53JW-SX082D bluscreen problem after upgrade ssd and ddram

bfg666
Level 7

‎11-30-2011 09:52 AM - last edited on ‎03-05-2024 07:33 PM by Community Admin

I upgrade with a KINGSTON SV100S264G ssd and i also put 2x4G Corsair CMSO4GX3M1A1333C9
i run windows 7 ultimate 64*
i wonder which could be the cause.
thanks in advance!
Labels:
0 Kudos
6,610 Views
10 REPLIES 10

Verruckt
Level 7

‎11-30-2011 10:01 AM

Did you upgrade both at the same time?
Did a clean install on the SSD?

If yes to both, try rolling back to the original RAM memory and see if the BSOD still happens.
ASUS G53SX
Core i7 2630QM | GTX 560M 2GB | 8GB DDR3 1333 | OCZ Vertex 3 120GB | Seagate Momentus XT 500GB
Razer Orochi | Razer Moray | Logitech X-540
0 Kudos

bfg666
Level 7
In response to Verruckt

‎12-01-2011 01:01 PM

i roll back to the original RAM memory and there is no problems.
but i feel sorry i can't use my 8Gb RAM because on the official site it says it can handle but it doesn't work with 6GB of RAM also.
10X for your help Verruckt
0 Kudos

fostert
Level 12
In response to bfg666

‎12-01-2011 08:56 PM

Download and burn memtest86+ onto a CD. Boot this CD, and let the tests run on your new memory for a full three passes (will take a while). If **ANY** errors are found, you should be able to RMA your RAM and get new sticks. If any errors are found on your RAM as tested, its likely the RAM causing your BSODs.
--
G74SX-CST1-CBIL, i7 2630QM 2GHz
32GB DDR3 RAM @1333MHz
GTX560M 3GB DDR5 (192 bit)
17.3" LED 1920x1080
Sentelic TP, BIOS 203
Debian Linux Wheezy (Testing) Kernel 3.2, NVIDIA 295.40
0 Kudos

dstrakele
Level 14

‎12-01-2011 09:45 PM

What is the firmware version of your SSD? See http://www.kingston.com/support/ssdnow/v100_firmware.asp
G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT
0 Kudos

bfg666
Level 7
In response to dstrakele

‎12-02-2011 10:18 AM

i have the latest firmware D110225a ,it came like this.
ill check the RAM and ill tell how it was.
10X
0 Kudos

bfg666
Level 7
In response to bfg666

‎12-03-2011 04:31 AM

I checked the RAM with memtest86+ and it shows they have 2 errors.
Ill send them to be replaced.
0 Kudos

fostert
Level 12

‎12-03-2011 08:01 AM

Yep; 0 zero errors is the only acceptable outcome for memtest with good RAM. Bets of luck with the replacements.
--
G74SX-CST1-CBIL, i7 2630QM 2GHz
32GB DDR3 RAM @1333MHz
GTX560M 3GB DDR5 (192 bit)
17.3" LED 1920x1080
Sentelic TP, BIOS 203
Debian Linux Wheezy (Testing) Kernel 3.2, NVIDIA 295.40
0 Kudos

Retired
Not applicable
In response to fostert

‎12-05-2011 08:33 AM

G53JW-SX082D suports only 1066MHz DDR3. Your Corsair CMSO4GX3M2A1333C9 is 1333MHz DDR3.
0 Kudos

bfg666
Level 7
In response to Retired

‎12-13-2011 11:19 AM

The RAM which came with the laptop it is also 1333Mhz.
0 Kudos