06-22-201504:00 AM - last edited on 03-06-202402:40 AM by ROGBot
Having purchased the Rampage V Extreme and 4x4GB Corsair Vengance DDR4 3000Mhz, I find that the DIMMS installed in A1 and B1 are fine, the two at C1 and D1 are not recognised......
I am about to initiate some analysis by swapping the DIMMS at D1/C1 to A1/B1 to see if it's DIMM or Motherboard related but just wanted some initial advice on possible issues/resolutions......
If this is happening at default settings (DDR4-2133):
1) Check the modules are seated correctly. 2) Check all modules are working - as you stated above 3) Check the CPU socket for bent pins. 4) Check the CPU cooler is not over-torqued.
1 - Should be but will dbl check 2 - Will do 3 - Hope not.......but if they are guess I have to return MB to supplier for replacement 4 - It's water cooled so unlikely
1 - Seated fine 2 - When swapped C1 & D1 work, A1 & B1 don't indicating bad DIMMS I assume
Another issue now in that having moved memory around bios settings appear corrupted.......Will start another thread for this though.....Thx for all help