cancel
Showing results for 
Search instead for 
Did you mean: 

BIOS reporting Overclockong Settings Incorrect (A2 Qcode)

colandy
Level 7
Have an issue on boot where system appears to have an issue locating hard drives.....

On boot system states:

USB Devices Total: 0 Drives, 1 Keyboard, 2 Mice, 4 Hub

Detected ATA/ATAPI
P7 SSD
P1 WDC
P3 DVDRAM
Overclocking Failed. Please enter setup to re-configure

Now. SSD is boot device and located, Q-Code indicates A2 (IDE Detect)
Had no intention of overclocking and don't believe I've changed anything, tried reseting and Disabling CPU Fan monitor as water cooled....same issue

Any idea's?
1,845 Views
1 REPLY 1

Raja
Level 13
If POST failed, the system was switched off by holding the power button or POST was interrupted, the overclocking failed message will be shown at the subsequent POST attempt to alert you that the system is in safe mode.

Would focus on getting the memory issues sorted before you proceed further.