Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jun 2015
    Reputation
    10
    Posts
    4

    BIOS reporting Overclockong Settings Incorrect (A2 Qcode)

    Have an issue on boot where system appears to have an issue locating hard drives.....

    On boot system states:

    USB Devices Total: 0 Drives, 1 Keyboard, 2 Mice, 4 Hub

    Detected ATA/ATAPI
    P7 SSD
    P1 WDC
    P3 DVDRAM
    Overclocking Failed. Please enter setup to re-configure

    Now. SSD is boot device and located, Q-Code indicates A2 (IDE Detect)
    Had no intention of overclocking and don't believe I've changed anything, tried reseting and Disabling CPU Fan monitor as water cooled....same issue

    Any idea's?

  2. #2
    Tech Marketing Manager HQ Array Raja@ASUS's Avatar
    Join Date
    Apr 2011
    Reputation
    161
    Posts
    7,454

    If POST failed, the system was switched off by holding the power button or POST was interrupted, the overclocking failed message will be shown at the subsequent POST attempt to alert you that the system is in safe mode.

    Would focus on getting the memory issues sorted before you proceed further.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •