©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

rrohbeck · ‎12-12-2011

Hello all (and especially Asus folks),
is there any documentation about the new DRAM setup parameters that appeared in the 992X beta code and which are now "official" in the 1003 version? Any release notes?
The reason I'm asking: I upgraded to 1003 yesterday and since then my RAM (16GB KVR1333D3E9S/4GEC) is no longer stable at 1866-10-10-10-27-1T; I had to go back to 1600 timings. It used to run fine for over a month (with 0903, 9920 and 9921) so something has probably changed.
What I'm seeing is a 100% freeze from one moment to the next even under no load - something that happened before when I tried to reach 2000 timings so it looked very familiar, and the fact that I've been running stable at 1600 since this morning (FX-8150, 4.5GHz) seems to confirm that.
Thanks!
Ralf

FX-8150@230x19.5@1.3875V--Crosshair V 1102--4xKVR1333D3E9S/4GEC@1866@1.45V--ECS GT430
Noctua NH-D14--Delta AFC1212DE-PWM--Shroud--Delta AFB1212HHE-PWM
4xST33000651AS RAID 10--Corsair Force GT 120GB--Samsung TS-H653J
Fractal Design Define XL--Seasonic X750 Gold--2xAcer S273HL
Debian Squeeze with 3.2 kernel--Windows 7

Mummy · ‎12-13-2011

You can Flash it back to 9921 via BIOS tool "ASUS EZ Flash 2 Utility". So you dont have to use it meantime, they mey fix it if there is something to fix.

Also it may help them if you post your pcs specs.

CPU: AMD FX-8150 MB: ASUS Crosshair V Formula DDR3: 2x4GB G.Skill Sniper DDR3-1866
GPU: ASUS 7970 SSD: 4x Corsair F3 120GB @ Raid0 PSU: SF Golden Silent 500W OS: W7 Ultimate 64bit

rrohbeck · ‎12-14-2011

Thanks but what's pcs?

FX-8150@230x19.5@1.3875V--Crosshair V 1102--4xKVR1333D3E9S/4GEC@1866@1.45V--ECS GT430
Noctua NH-D14--Delta AFC1212DE-PWM--Shroud--Delta AFB1212HHE-PWM
4xST33000651AS RAID 10--Corsair Force GT 120GB--Samsung TS-H653J
Fractal Design Define XL--Seasonic X750 Gold--2xAcer S273HL
Debian Squeeze with 3.2 kernel--Windows 7

NemesisChild · ‎12-15-2011

rrohbeck wrote:
Thanks but what's pcs?

PC = Personal Computer

Intel i9 10850K@ 5.3GHz
ASUS ROG Strix Z490-E
Corsair H115i Pro XT
G.Skill TridentZ@ 3600MHz CL14 2x16GB
EVGA RTX 3090 Ti FWT3 Ultra
OS: WD Black SN850 1TB NVMe M.2
Storage: WD Blue SN550 2TB NVMe M.2
EVGA SuperNova 1200 P2
ASUS ROG Strix Helios GX601

rrohbeck · ‎12-15-2011

Ah, got it. I thought pcs was something newfangled like XMP.
I filled out my signature so see below.

FX-8150@230x19.5@1.3875V--Crosshair V 1102--4xKVR1333D3E9S/4GEC@1866@1.45V--ECS GT430
Noctua NH-D14--Delta AFC1212DE-PWM--Shroud--Delta AFB1212HHE-PWM
4xST33000651AS RAID 10--Corsair Force GT 120GB--Samsung TS-H653J
Fractal Design Define XL--Seasonic X750 Gold--2xAcer S273HL
Debian Squeeze with 3.2 kernel--Windows 7

csimon · ‎12-16-2011

I'm had a similar issue with bios 1003 and had to loosen my timings from ddr3-1600 7-8-7-22-1T to 7-9-8-24-1T. Still testing stability on this.

rrohbeck · ‎01-25-2012

I'm back to 1866 with the 1102 code. Yay!

FX-8150@230x19.5@1.3875V--Crosshair V 1102--4xKVR1333D3E9S/4GEC@1866@1.45V--ECS GT430
Noctua NH-D14--Delta AFC1212DE-PWM--Shroud--Delta AFB1212HHE-PWM
4xST33000651AS RAID 10--Corsair Force GT 120GB--Samsung TS-H653J
Fractal Design Define XL--Seasonic X750 Gold--2xAcer S273HL
Debian Squeeze with 3.2 kernel--Windows 7

RAM issue with 1003 (CH V/Bulldozer)