10-02-2015 10:28 AM - last edited on 03-06-2024 01:53 AM by ROGBot
10-02-2015 10:42 AM
10-03-2015 02:59 PM
Nate152 wrote:
Hello gabecubano14
Welcome to the ROG forum.
List your complete system specs and any usb devices you may have connected for us please.
10-03-2015 03:59 PM
10-03-2015 04:12 PM
Nate152 wrote:
Thank you
Actually the ripjaws v is supported, click on the QVL tab in the link.
http://www.gskill.com/en/product/f4-3000c15q-16gvrb
Ripjaws 4 is for x99 but if it's working you can use it.
10-03-2015 04:21 PM
10-03-2015 04:37 PM
Nate152 wrote:
If it's listed on the ram manufacturers website it's all good.
Does your ripjaws v kit have tighter timings than the ripjaws 4 kit? If it does you may need to increase the cpu system agent voltage and vccio voltage a little to get it stable.
If the ripjaws v kit has tighter timings try it again with these settings.
cpu system agent voltage 1.10 - 1.15v (up to 1.25v if needed)
vccio voltage 1.15v
These should be found on the extreme tweaker tab.
10-03-2015 04:38 PM
Praz wrote:
Hello
X99 memory, when used with Z170, may require additional voltage for full stability.
10-03-2015 04:44 PM