10-26-2015 11:58 AM - last edited on 03-06-2024 01:43 AM by ROGBot
10-26-2015 01:52 PM
10-26-2015 04:36 PM
Arne Saknussemm wrote:
I would remove all power from the board....take out battery for a few minutes....then replace battery and clear CMOS and then restore power and flash the latest BIOS using BIOS flashback method...
Then try to boot
Make sure BIOS flashback is working...i.e. bios light flashes for over a minute...not just once or twice....
10-26-2015 05:16 PM
10-27-2015 04:07 AM
10-27-2015 07:47 AM
zeroDivisible wrote:
Firstly I put 0907 BIOS on the USB stick, booted to BIOS and started an update. It restarted the box in the end but boot process was hanging, giving "99" QCode. I tried few times, did CMOS reset, no change. So I tried flashing some older bios using USB Bios Flashback - but right now after powering on, motherboard just hangs, showing "00" QCode.
10-27-2015 12:45 PM
Chino wrote:
When you tried to update the BIOS for the first time, did you let it finish?
juzz86 wrote:
EDIT: It seems code 00 isn't related to the CPU on newer boards - I learned today. Other users running into 00 have had luck re-seating DIMMs and setting DDR voltages manually. Try your RAM first, sorry for leading you up the garden path 🙂
10-27-2015 03:11 PM
zeroDivisible wrote:
I think it went till the end - i could see the progress bar, the machine rebooted, then it was hanging for ~20 mins on the 99 error, before I did anything.