©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

devplus31 · ‎11-28-2015

Hello,

I do not have any signal when using the IGFX thought HDMI, The screen has VGA + DVI inputs (Samsung Full HD SA300), i'm using HDMI/DVI Adapter.

I have tested the PC with a TV and it worked fine. (HDMI to HDMI)
The monitor also works fine with my laptop I'm using it as External screen.
I Think the monitor isn't compatible, or the HDMI/DVI adapter

Thank you very much.

Chino · ‎11-28-2015

Probably the HDMI/DVI adapter is causing the issue.

devplus31 · ‎11-28-2015

Chino wrote:
Probably the HDMI/DVI adapter is causing the issue.

Thanks for your response.

I'm not really sure, because the HDMI/DVI adapter works fine with my laptop.

Also I'm using High Speed HDMI With Ethernet cable.

Shades228 · ‎11-28-2015

devplus31 wrote:
Thanks for your response.

I'm not really sure, because the HDMI/DVI adapter works fine with my laptop.

Also I'm using High Speed HDMI With Ethernet cable.

Check this thread and ensure you're using the new driver in the link about half way down.

https://rog.asus.com/forum/showthread.php?77568-VIII-Hero-(and-Ranger)-broken-HDMI-output-after-BIOS...

Chino · ‎11-28-2015

What you can do is try using a HDMI to DVI cable instead of the adapter.

devplus31 · ‎12-04-2015

Chino wrote:
What you can do is try using a HDMI to DVI cable instead of the adapter.

Yes, that's what i was thinking I'll get one shortly

Thanks for your responses 🙂

No Video Output with Intel GPU