Results 1 to 6 of 6
  1. #1
    ROG Member Array
    Join Date
    Oct 2012
    Reputation
    10
    Posts
    7

    Maximus VIII Extreme: OC Panel II problem

    Hi, I have a problem with the OC Panel 2 and Maximus VIII Extreme, virtually operate everything except the change of BCLK.
    Later I tried to install Turbo V Core and with that I can change the BCLK, every time I try with OC Panel II my system freeze.
    What could be the problem?

    My configuration:
    CPU Intel Core i7-6700K
    OS Windows 8.1
    Bios rev 12.02
    ROG Connect Plus installed
    Intel Management Engine driver installed.
    All driver installed

  2. #2

  3. #3
    ROG Member Array
    Join Date
    Oct 2012
    Reputation
    10
    Posts
    7

    Generally fort my test on ram i start with 100MHz and then I make changes to 1MHz up to a maximum of 104 and a minimum of 98MHz.

  4. #4
    ROG Guru: Grand Master Array
    Join Date
    Oct 2012
    Reputation
    339
    Posts
    15,255

    And are you making changs to the Vcore at the same time? Your freezes might be caused by an unstable OC.

  5. #5
    ROG Member Array
    Join Date
    Oct 2012
    Reputation
    10
    Posts
    7

    I'm not a newbie, I also wrote that the same tests I made with Turbo Core V with no problem. Obviously the problem is in the management of the BCLK by the panel due to a problem with firmware or driver ROG Connect Plus, or missing something in terms of software for it to work well.

  6. #6
    ROG Member Array
    Join Date
    Oct 2012
    Reputation
    10
    Posts
    7

    No one has a solution to my problem?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •