Results 1 to 1 of 1
  1. #1
    ROG Enthusiast Array
    Join Date
    Aug 2013
    Reputation
    10
    Posts
    31

    Rampage 3 Gene Overclock (?)s

    It's been a while since I've messed around with x58 but I downsized not too long ago and it's time to overclock. I just have a few simple questions...I hope.

    1.Qpi Link Data Rate - I'm guessing that this setting is per cpu. I have an i7 970 and it's rate is 4800 MT/s. Is this setting set in stone for all cpus? When I started my overclock, I was originally leaving it at "auto" . I have since hit a wall and started my overclock with a different approach and this is one of the settings that I am going to manually set.

    2. UCLK Frequency - to my understanding, a hexcore only needs 1.5x the rated ram speed. Is this correct? My ram is rated for 2000mhz so I would set it(UCLK) at 3000mhz? I have been leaving this on auto. Unfortunately, every time I change this from auto, I start crashing. Is there something else I should be looking at? I originally had this chip up to 4.25Ghz with this on auto

    3. CPU Differential Amplitude - how do I know how much I need? I have been setting it to 800mv just because that's what "everybody" else was doing. I would like to know the reasons behind and if there's a better choice.

    My goal is 4.2Ghz with 6gigs of ram at or close to the rated 2000mhz. It'd be nice to see some other 970 templates. Thanks in advance

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •