Need help w/ BIOS config for booting M8R into W7 on a M.2 NVMe SSD

[sl@sh]

Problems solved. There were two things causing problems:

1. the newest BIOS 1302 appears to be causing instabilities. I'm still looking into that issue, but I've found that version 1202 is working well

2. Apparently, either the BIOS or the motherboard hardware is not suited to the memory modules I am using, at least not when installing the full set. Installing just 2 works well, no matter which two.
To test my memory modules, I've used Memtest86+. Until now, I've tested 3 pairs of modules from the two systens I have built, both for two full pases, taking about 70-80 minutes to run. No errors were reported. I also ran Memtest86+ with a full set of 4, but cancelled the test after ~5 minutes and more than 400 errors!

Since I'm using BIOS 1202 and only 2 modules, I haven't had any more issues at all! Same for the other system, which is updated to BIOS 1302 in the meantime - it seems like 1302 is only causing issues during installation, but it's too early for a final verdict.

[Chino]

1. BIOS versions react differently. Probably one of the main reason why I discourage users to touch their BIOS if their system is stable on a specific revision.

2. Answered in your other thread.