Story of the build:

some weeks ago, a great person at Asus contacted and asked me if I want to do a build for the Asus suite at CES show in Las Vegas
around the new Maximus VIII Formula, for sure I said yes immediately,

they told me to do everything I want except, if I'm able , show the most I can of the motherboard

at same time some idea appears in my head,
want it simple but really clean and want it clear its a ROG build but don't want to put stickers everywhere,

and they ask me if I can make a something about the 10th anniversary of the brand and they sent me the logo

fit perfectly to the idea

I asked to Parvum System, EKWB and Darkside if they want jump in the project and no hesitation,
they accepted right away, and some day later, Corsair join the group

want to say Thanks to all, Asus ROG, Corsair, Parvum, Darkside and EKWB for their help, its so much appreciate

now
Specs:
Case: Parvum System M1.0
CPU: Intel i7-6700k
Motherboard: Asus ROG Maximus VIII Formula
GPU: Asus GTX980Ti Strix
Ram: 32Gb DDR4 2666 Corsair Dominator Platinum
PSU: Corsair AX1200i
SSD: 1 x Kingston 120Gb and 1 x Toshiba 500Gb SSD

Water Colling
CPU Block: EK Su[premacy EVO
GPU Block: EK-FC980 GTX Ti Strix
Pump: EK-XRES 140 DDC 3.2 PWM Elite
Reservoir: upgrade to EK-RES X3 - TUBE 400
Radiator: 2 x EK-CoolStream PE 240
tubing: EK-HD PETG Tube 10/12mm
Fittings: 16 x EK-HDC Fitting 12mm G1/4 - Elox Black
Angle adapter: some EK-AF Angled 2×45° G1/4 Black and some EK-AF Angled 90° G1/4 Black
EK-AF Ball Valve (10mm) G1/4 - Black
some EK Spacer of different length
Fan: 7 x 120mm Bitfenix Spectre Pro Led red (3 pins)

accessories
Led: 6 x 3mm DarkSide Connect Modular LED - RED
Led: 3 x 12" (30cm) DarkSide CONNECT Dimmable Rigid LED Strip - RED
Sleeving: 5/32" (4mm) DarkSide HD Cable Sleeving - Dark Red
Sleeving: 5/32" (4mm) DarkSide HD Cable Sleeving - Jet Black
Sleeving: 10mm HD SATA Cable Sleeving - Black
Connector: 24-Pin, 8-Pin and 6-Pin ATX Female Power Connector - Deep Red
Wire: 18AWG Black Computer Wire
some custom made sticker for GPU, Case and more


now some photos

first, the star of the show, the motherboard itself










sleeving pattern and color test, finally keep this one









I tried some to add something to SSD and GPU












and finally use same design as the SSD to keep it simple and clean





now, the motherboard, Radiator and reservoir test fit
need to plan how I will install the GPU







and this is where I made the fil port