Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Can I use LN2 Bios mode with watercooled GPU?

jarokamaro007
Level 7

‎02-28-2016 03:12 AM - last edited on ‎03-06-2024 02:46 AM by Community Admin

Hi.can i solder and use LN2 BIOS if my card is watercooled? My temps are around 40-50 after few hours heavy gaming..Atm higher score is 20009 in firestrike but want try more.. Asus R9 290x Matrix Platinum 4gb..Atm i cant go more than 1232 on core and 1400 memmory with maxed voltages in Gpu Tweak II...
Labels:
0 Kudos
4,472 Views
5 REPLIES 5

yamatosan
Level 8

‎02-28-2016 07:08 AM

edited. out of topic
0 Kudos

jarokamaro007
Level 7

‎02-29-2016 01:51 AM

Did U do it before?
0 Kudos

Chino
Level 15
In response to jarokamaro007

‎02-29-2016 07:01 AM

jarokamaro007 wrote:
Did U do it before?


Yes, I've done so with the GTX 980 Matrix. But you can only go so far on air. lol
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

Menthol
Level 14

‎02-29-2016 03:56 AM

You can use the LN2 bios if you wish, if you solder the jumper it will allow more voltage control, I have used this on past Matrix cards, if you are using the newest Nvidia cards, Maxwell they don't always scale well using higher voltages unless using extreme cooling, the only way to find out is try it
0 Kudos