cancel
Showing results for 
Search instead for 
Did you mean: 

Raid

tiagocasagrande
Level 7
Hello guys,
Can I create more than one RAID group? I have a RAID 0 set and would like to create another RAID 1 with new hard drives
3,775 Views
9 REPLIES 9

Arne_Saknussemm
Level 40
Hi tiagocasagrande 🙂

Yes, that is perfectly possible...

GoNz0-
Level 10
You can have 3 raid arrays on the main intel controller, the ports are not in logical order, they are in the Asus did them after the xmas party order.

Arne_Saknussemm
Level 40

Arne Saknussemm wrote:
True 😉



yellow intel ports


7-10 are also intel just another controller iirc?

GoNz0- wrote:
7-10 are also intel just another controller iirc?

asmedia

GoNz0- wrote:
7-10 are also intel just another controller iirc?


Yes, Intel but no RAID...

AS media are above 5+6

Arne Saknussemm wrote:
Yes, Intel but no RAID...

AS media are above 5+6

Oh sorry, I read that wrong.

cekim
Level 11
Yep - 6 ports - mix as you please... Using all 6 for 2 arrays right now (both raid0, but the 2nd was raid1 for a while but I got tired of all that data integrity - well actually, I just got my backup setup tuned up so I no longer had to worry)

Using them in linux right now, but winblows worked too previously:
/dev/md125 15T 172G 14T 2% /md1 <- raid0 HDDx2 - was raid1 and raid10 previously
/dev/md124 1.9T 724G 1.2T 38% /md0 <- raid0 SSDx4

/dev/md124:
Timing buffered disk reads: 4688 MB in 3.00 seconds = 1562.23 MB/sec
/dev/md125:
Timing buffered disk reads: 1218 MB in 3.00 seconds = 405.63 MB/sec

Arne_Saknussemm
Level 40
Noooooo apology needed cekim!....I had to read it 10 times to work out what was what with ports....:confused: