Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Sep 2012
    Reputation
    10
    Posts
    1

    6700k oc @ 4800mhz adaptive mode?

    Hello all

    I think I might have been some what lucky with this 6700k
    Had no problem bumping it to 4800mhz at 1.315v haven't fine tuned it yet though..

    But i set the volt in manual mode. When I switch to adaptive mode there's a setting called offsetmode sign and I can then choose from + and - what's the difference?
    And should I type my target max volt in some where?

    It is because I tried booting in adaptive with it set to - and it failed to boot. So I'm curious as to what this means.

    Last thing, I should be setting it to adaptive right? Manual is only to determine the stable volts right?

    From Rasmus

  2. #2
    New ROGer Array
    Join Date
    Dec 2016
    Reputation
    10
    Posts
    1

    I always use manual. I þhink that's standard.

    You also got CRAZY lucky if u can do so much as light gaming at that voltage/speed. i needed to set vcore to 1.3875 w an LLC setting of 5 to get FULLY stable at 4.7ghz w my z170 sabertooth and 6700k. From what I know, this is about normal.

    (sucks now, tho, caûse ever since the last 3 bios versions wont giveme that much control over the voltage anymore - it's either 1.385 or 1.39.........)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •