Results 1 to 1 of 1
  1. #1
    ROG Member Array
    Join Date
    Mar 2014

    Maximus IV Extreme Marvell Raid Controller and Windows 10

    Hi all

    I have a Maximus IV Extreme based computer which i use as a secondary, which I wanted to upgrade from Windows 7 to Windows 10.

    The upgrade to Windows 10 was successful, and was straight forward, where I have a Corsair SSD installed in the Intel controller.

    The issue I have is that I have 2 7200rpm drives installed, each with 2 TB storage, in the Marvell Raid Controller, and installing Windows 10 doesnt detect the driver for it.

    I went and used the Windows 8 driver available on Asus website called:

    Marvell SATA Driver V1.2.0.1027 for Windows 8 32bit & 64bit.(WHQL)

    The driver is detected as valid and the drives becomes available and is working. The problem I have is that after a reboot the system goes into a panic and tries to repair.

    Does anyone have a valid approach or driver reference for this situation?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts