Results 1 to 3 of 3

Hybrid View

  1. #1
    ROG Member Array
    Join Date
    Dec 2015
    Reputation
    10
    Posts
    17

    predator 360 1.1 pump issue

    hey guys, hoping someone here might be able to help or point me in the right direction with a couple of things.

    First issue, the hub that came with my 360 stopped working. To circumvent this niggle I hooked the fans up and have them connected via PWM to the CPU header - no problems here. The pump on the other hand has given me quite a few hassles.

    I've swapped it around various fan headers including the dedicated water pump header on my mobo (asus z170 sabertooth) and it'll work for the most part, but every few days when waking from sleep or start up it just wont spin up, and the only thing that will get her spinning again is me going into the UFEI to reset all BIOS prefs and redo the whole system fan profiles (sometimes I have to change the hub it's connected to). Something I haven't tried (I dont think anyway, I've tried lots of stuff) is to have it set to DC instead of PWM and have a constant voltage. I guess my question is does the pump need a minimum signal strength to reliably start up? Are there some PWM/fan profile caveats to avoid altogether for the pump component?

    Second possible issue, my cpu temps fluctuate somewhat (under the normal predator operational status). I'm talking when idle and in Windows. They'll vary by 10 degrees up and down with nothing open or happening. I'm getting these readings from MSI After Burner. When looking at the temps in the UFEI the curve sits on a stable 24 degrees, so I suspect if there is a problem it's happening in the OS somehow.


    I see that the pumps Operating voltage are 8*-13,2VDC *9v starting
    Could it be that the starting 9v isn't being fed to the unit when waking from sleep and sometimes from start? I have a 4pin extension cable between the pump cable and the motherboard. I could try connecting it directly (with no extension cable) to the mobo, but does cutting the ties void the warranty?

  2. #2
    ROG Enthusiast Array EK Luc PC Specs
    EK Luc PC Specs
    MotherboardAsus ROG Rampage V Edition 10
    Processori7-6800K
    Memory (part number)2 x G.SKILL TridentZ (3200C16Q-16GTZB)
    Graphics Card #1Asus GTX 1070 ROG Strix (O8G-GAMING)
    Graphics Card #2Asus GTX 1070 ROG Strix (O8G-GAMING)
    CPU CoolerCustom Watercooling
    Casebe quiet! Dark Base Pro 900
    Power SupplyCorsair AX860i
    OS Win10
    EK Luc's Avatar
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    42

    Hi,

    Did you try to set your PWM curve in a way that the pump would always run at 100%?

    Also, you can cut the ties, it's not a problem.

  3. #3
    ROG Member Array
    Join Date
    Dec 2015
    Reputation
    10
    Posts
    17

    Hey thanks for the rrply - yes, I've tried runing it at 1005 and it wont start.
    I've filed an RMA so thanks anyway for your help.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •