ASUS Rig:
Motherboard model: ASUS ROG RAMPAGE V EXTREME/U3.1 LGA2011-V3 DDR4 M.2 ACWiFi USB 3.1 Type A Intel X99 eATX Motherboard

UEFI Version: 2001

CPU: Intel Core i7-5820K Haswell-E 6-Core 3.3GHz LGA 2011-v3 140W Desktop Processor BX80648I75820K

Memory kit part number (s) and amount in GB: G.SKILL Ripjaws 4 series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM 2133 (PC4-17000) Desktop Memory Model F4-2133C15Q-32GRR

GPU: ZOTAC GeForce GTX 980 Ti AMP! 6GB 384-Bit GDDR5 PCI Express 3.0 SLI Support Graphics Card (ZT-90503-10P)

SSD/HDDs/Optical drives: OCZ Storage Solutions RevoDrive 350 Series 480GB PCI Express Generation 2 x 8 Solid State Drive RVD350-FHPX28-480G

PSU: Thermaltake TOUGHPOWER GRAND 80 Plus Gold 1200W Semi Modular Power Supply TPG-1200MPCUS

USB Devices (model/version number): Transcend 1TB, Toshiba 1TB

Monitor: Asus

CPU Cooler: Corsair Hydro Series H110 280 mm High Performance Liquid CPU Cooler

PC CASE IYPC Alpha-DB6 Black Acrylic ATX Bench Case Bench Computer Case for ATX/Micro ATX motherboard

Operating system: Win7 Ultimate 64bit Activated

Drivers Installed (include version):

Any third Party temp/voltage software installed: No

System Overclocked (provide details)? No

I don't mean to be impatient or ungrateful, but how come no one ever responds to my posts to help me? Am I not following some forum etiquette? I need help please.

Not sure but check the manual for the lanes on the pci-e when a 5820k is used. I think it cuts some lanes on some pcie and don't remember if anything else is disabled when a 5820k is used.

5820k has 28 lanes
5930 5960 have 40

Sent from my SM-N910C using Tapatalk

What PCIe slots are currently populated? That may explain why the USB 3.1 card is not working.

Hi memetic

Check in the device manager, a yellow triangle beside pci simple communications controller is due to the MEI driver not installed.

I am using the following:

Slot 1 - Graphics
Slot 4 - Revo drive
Slot 6 - USB 3.1

All the other slots are empty.

Thank you guys for replying.

Instead of repairing the driver installation, can you install the Asmedia driver? I wonder if it's a driver issue.