©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

samarlian · ‎06-11-2016

So i flashed my bios on wednesday from 2101 to 3101
The problem i have is once pc is shutdown and powered off at the wall. When i turn it back on it goes to dos screen and says

Bios is updating
do not shutdown or reset the system to prevent system boot failure ... it then reboots 3-4 times saying this and then reboots saying

Please enter set up to recover bios
When raid configuration was built, ensure to set sata configuration to Raid mode.
Press F1 to run set up.

Once i have pressed F1 and entered bios then hit F10 the pc boots back into windows.

The usb stick with the R5E.CAP has been removed from the pc incase you think it was left in the rear and keeps trhying to install.
If i dont power it off at the wall the pc boots normal any ideas ???

Thanks in advance

Samarlian

drop4205 · ‎06-11-2016

Try reflashing the bios a second time

Maximus XI Formula, I9-9900k, Phantex Evolove X, Seasonic Titanium 850W, Custom loop PE360+SE360 Rad, G.Skill Trident Z F4-3200C14 32g, Nvidia Reference RTX 2080 TI, Samsung 970 EVO Plus 1Tb, Windows 11

samarlian · ‎06-11-2016

its like 18 months old , the battery is fine but did put another new one in to rule it out

samarlian · ‎06-12-2016

then after that 3-4 reboot step cycles it then does this asking to recover the bios

samarlian · ‎06-11-2016

it wont let me install it again, so iam going to flash it back first

FireRx · ‎06-11-2016

Samarlian, how old is you board, Do you have the means to test you battery on the board? Just curious

Intel Core i9 103900KS
Asus Maximus Z790 Extreme [bios 1801]
LG (34U97-s) Monitor 3440 x1440
Nvidia RTX 3090 FE
Windows 11 Pro
64gbz Memory

samarlian · ‎06-12-2016

here is a picture of what it does after a boot up after the plug in the wall has been powered off

samarlian · ‎06-12-2016

I did a bios flash back to 3009 and then re flashed 3101 but still the same after a cold boot from the pc been powered down from the wall as per pics above

So looks like i will have to leave the motherboard on standbye all the time and not turn off at the mains.

Can any one else see if they get this problem

and why is it mentioning Raid as i have never used Raid on this board ????

samarlian · ‎06-14-2016

Can anuone help ??

drop4205 · ‎06-14-2016

Pull board from case and place on cardboard. Have cpu, cpu cooler, gpu, one stick of ram and hatddrive and see if it works to rule out short or bending of board in case. You have another psu to try? Any codes it stops on?

Maximus XI Formula, I9-9900k, Phantex Evolove X, Seasonic Titanium 850W, Custom loop PE360+SE360 Rad, G.Skill Trident Z F4-3200C14 32g, Nvidia Reference RTX 2080 TI, Samsung 970 EVO Plus 1Tb, Windows 11

Help with BIOS error