06-26-2016 08:33 AM - last edited on 03-06-2024 02:07 AM by ROGBot
06-26-2016 08:47 AM
06-26-2016 09:07 AM
Hopper64 wrote:
Been trying to stabilize this new memory. Just tried the XMP profile. Hardware in my spec list. I kept getting blue screens in mem test. I had 20 instances going per 10 cores. It crashed to a blue screen two or three times. Figured I need to manually input the settings in the bios for the memory. Ended up with 33 and 68 q codes and would not even enter the bios. Sequentially took out memory modules with no change. Used one memory module from another DD4 kit, still stuck at 33. Cleared CMOS, no change. Switched bios chips, no change. Stuck at 33. Pulled the plug and took out the battery for a few hours. Rebooted with q code 00.
I had a 5930K from another build so I installed that and the machine booted with no problem. Installed the original memory too. No error codes.
I guess I have a defective CPU. Off to RMA.
06-26-2016 09:29 AM
06-26-2016 12:40 PM
06-26-2016 01:07 PM
jrmcdou wrote:
I'm just wondering if the imc got damaged on the cpu from overvolting. I never use xmp anymore now that the imc is on the processor. I do everything manually.
06-26-2016 01:16 PM
jrmcdou wrote:
I'm just wondering if the imc got damaged on the cpu from overvolting. I never use xmp anymore now that the imc is on the processor. I do everything manually.
06-26-2016 04:10 PM
06-26-2016 07:47 PM
06-27-2016 09:43 AM