Results 1 to 2 of 2
  1. #1
    ROG Junior Member Array
    Join Date
    Jun 2016
    Reputation
    10
    Posts
    2

    RVE10 sometimes stuck on setup (Q code A9)

    Sometimes when I do a soft reset, my motherboard seems to always enter the bios setup. A hard reboot, including manually switching off the power supply, always fixes the issue.

    The board is overclocked, but it passes all the stability tests I've tried (rb for 8+hours, memtest for 24h...)

    Any ideas?

  2. #2
    Tech Marketing Manager HQ Array Raja@ASUS's Avatar
    Join Date
    Apr 2011
    Reputation
    161
    Posts
    7,454

    Means it is failing to find a BOOT device. Likely the overclock is stable enough for the OS, but perhaps not stable enough for consistent POST. If it doesn't happen at stock you will need to tune the applied overclock, or reduce the operating frequency.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •