The only time I had that issue is when the cable was a bit loose on the back of the panel. I had to cut off a bit of the rubber sheathing around the connector to make it fit snugly.

Disconnect your OC Panel. Clear your CMOS. Reconnect OC Panel.

I just got the new RVE 10TH and my OC panel was on and off depending on what I later found out was a bad wire. I ordered one of the long cables and what I guess is the power wire was loose. Once I fixed that it worked again.
[

QUOTE=memetic;599723]Like everything that breaks, one minute my OC Panel was working and then it just stopped working. The display is showing "0"s for all the values. So, it is on, it is just not getting the data.

I did not make any changes to anything before this happened.

Thank you!


ASUS Rig:
Motherboard model: ASUS ROG RAMPAGE V EXTREME/U3.1 LGA2011-V3 DDR4 M.2 ACWiFi USB 3.1 Type A Intel X99 eATX Motherboard

UEFI Version: 2001

CPU: Intel Core i7-5820K Haswell-E 6-Core 3.3GHz LGA 2011-v3 140W Desktop Processor BX80648I75820K

Memory kit part number (s) and amount in GB: G.SKILL Ripjaws 4 series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM 2133 (PC4-17000) Desktop Memory Model F4-2133C15Q-32GRR

GPU: ZOTAC GeForce GTX 980 Ti AMP! 6GB 384-Bit GDDR5 PCI Express 3.0 SLI Support Graphics Card (ZT-90503-10P)

SSD/HDDs/Optical drives: OCZ Storage Solutions RevoDrive 350 Series 480GB PCI Express Generation 2 x 8 Solid State Drive RVD350-FHPX28-480G

PSU: Thermaltake TOUGHPOWER GRAND 80 Plus Gold 1200W Semi Modular Power Supply TPG-1200MPCUS

USB Devices (model/version number): Transcend 1TB, Toshiba 1TB

Monitor: Asus

CPU Cooler: Corsair Hydro Series H110 280 mm High Performance Liquid CPU Cooler

PC CASE IYPC Alpha-DB6 Black Acrylic ATX Bench Case Bench Computer Case for ATX/Micro ATX motherboard

Operating system: Win7 Ultimate 64bit Activated

Drivers Installed (include version):

Any third Party temp/voltage software installed: No

System Overclocked (provide details)? No