07-14-2016 05:11 PM - last edited on 03-06-2024 01:58 AM by ROGBot
07-14-2016 07:32 PM
07-14-2016 08:27 PM
07-19-2016 10:11 AM
MeanMachine wrote:
Hi Not_Enough_Rage 🙂
Yes all drivers should be up to date and you may have to update your BIOS.
Detailed instructions for a Bios update will be given if required.
The Intel Management Interface Engine is an important driver to update and should be got directly from the Intel site.
Check all your drivers in Device Manager, when and if you get into Windows.
Qcode 10 is "PEI core is started" which means Pre EFI initialization. This phase of post is looking for memory then passes on to the DXE environment.
I cannot find your DIMMs listed on the ASUS QVL list (although it may not be up to date), so they may or may not work well with the CPU IMC.
Bios Tweaks can rectify this, if you know what you are doing and it can be frustrating to get them to work.
Try with just one DIMM in first slot initially in single channel mode and see if that works and make sure the module is inserted and pushed down correctly.
You can add the other modules later.
See how you go and please report back.
07-14-2016 09:08 PM
07-15-2016 06:30 AM
MeanMachine wrote:
Did you install the driver with Admin privilege as MS security may prevent the installation. you must have the correct driver for your MB.
Run the Intel Management Engine Verification Utility.
Your DIMMs would default to standard JDEC spd timings and if you have an XMP profile you can manually change the settings in Bios.
You can check the SPD info for Primary Timings and voltage in the Tools section of Bios.
As I said you may need a Bios update, What version are you on.?
07-15-2016 07:32 PM
07-16-2016 04:50 AM
07-16-2016 06:02 AM
07-16-2016 09:03 AM