cancel
Showing results for 
Search instead for 
Did you mean: 

R5E Edition 10 & GSKILL TridentZ?

Psychor
Level 7
It's been awhile, but from what I recall if you wanted to run GSKILL on an X99 board you had to go with their Ripjaw line and not the Trident line.

However, GSKILL TridentZ F4-3200C14Q-32GTZSW (http://www.gskill.com/en/product/f4-3200c14q-32gtzsw) is listed as a quad channel kit and under the QVL tab the R5E E10 is listed as supported!

Am I crazy?
2,600 Views
4 REPLIES 4

Feklar
Level 8
Yes you are. That's why you own this board like us. Joking of course. I'm using the Gskill Trident Z F4 3200C16Q2-64GTZSK kit. At current I'm only using half (32gb) and I'm running them at 2400mhz and 10 10 10 24 1t timings and never had an issue.

i9 12900k + Asus Maximus Z690 Apex + EVGA RTX 3090 Ti FTW3 ULTRA
G.SKILL Trident Z5 RGB Series 32GB (2 x 16GB) DDR5 6000l XMP 3.0 Desktop Memory Model F5-6000U4040E16GX2-TZ5RK+ Samsung 870 Pro SSD, EVO 1TB, EVO 2TB
EVGA SuperNOVA 1000 T2 Power Supply + Fractal Meshify 2 XL case
Ek Velocity 2 CPU block, Ek GPU block
Koolance Fittings and QDC's + Mo-Ra 3 Pro 4x180 Radiator
LG 38GL950G Monitor +
Windows 10 Pro

Menthol
Level 14
The kit you linked works great on the RVE 10, they have basically identical modules on both the Trident Z and Ripjaw V series, the Trident has a much nicer heatsink and costs a few dollars more, the 14-14-14-36 timing kits work very good on both X99 and Z-170 boards, you won't be disapointed

Psychor
Level 7
Thanks guys. I'm ordering this kit now to replace the Corsair kit I originally purchased.

Vlada011
Level 10
I would probably bought same kit for RV10THE.
GSkill say QVL for you board...

I checked on Newegg and customer experience say that new Rampage is far better and less problematic board.
People had many bugs with RVE. RVE is beautiful board, almost same as Black but Black is much better hardware, that's obvious.
Bad because they didn't build her for us earlier. :(.
I never wait some specific hardware so long, never before. 🙂