Results 1 to 5 of 5
  1. #1
    ROG Enthusiast Array Leadbelly1978 PC Specs
    Leadbelly1978 PC Specs
    MotherboardASUS MAXIMUS VI HERO LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    ProcessorIntel Core i7-4770K Quad-Core Desktop Processor (3.5 GHz)
    Memory (part number)Corsair Vengeance 16GB (2x8) DDR3 1600 MHz
    Graphics Card #1MSI GTX 970 4GB Twin Frozer V
    Storage #1500GB SSD
    Storage #22TB Western Digital Green
    CPU CoolerCorsair Hydro Series H110i CPU Cooler
    CaseGraphite Series 760T Black Version Full-Tower Windowed
    Leadbelly1978's Avatar
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    48

    I have a quick question regarding the Sensor1 Temperature..?

    I have a quick question regarding the Sensor1 Temperature.
    I looked through my UFIE and after I found it and it said ( Sensor1 Temperature) N/A.

    I mean, I have the ASUS Maximus HERO V11, I'm am sure that I connected the (2-pin T_Sensor1) too the connector.
    Is that normal or not?

    Thanks a lot.
    ASUS MAXIMUS VII HERO LGA 1150
    Intel Core i7-4790K Quad-Core Desktop Processor (4.0 GHz)
    Corsair Hydro Series H110i CPU Cooler
    MSI GTX 970 4GB Twin Frozer V
    500GB SSD, 2TB WD
    G.SKILL Trident X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600
    (PC3 12800)
    Corsair RM 1000W 80 Plus Gold Fully Modular Cables
    Graphite Series 760T Black Version Full-Tower Windowed

  2. #2
    Moderator Array
    Join Date
    Jun 2016
    Reputation
    10
    Posts
    241

    Hi Leadbelly1978,

    That means the sensor is not being registered by the Super I/O.
    Try checking a few things:
    1. If you have connected the sensor correctly
    2. If the sensor is still functional

  3. #3
    ROG Enthusiast Array Leadbelly1978 PC Specs
    Leadbelly1978 PC Specs
    MotherboardASUS MAXIMUS VI HERO LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    ProcessorIntel Core i7-4770K Quad-Core Desktop Processor (3.5 GHz)
    Memory (part number)Corsair Vengeance 16GB (2x8) DDR3 1600 MHz
    Graphics Card #1MSI GTX 970 4GB Twin Frozer V
    Storage #1500GB SSD
    Storage #22TB Western Digital Green
    CPU CoolerCorsair Hydro Series H110i CPU Cooler
    CaseGraphite Series 760T Black Version Full-Tower Windowed
    Leadbelly1978's Avatar
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    48

    Unhappy

    Quote Originally Posted by ASUS-OP View Post
    Hi Leadbelly1978,

    That means the sensor is not being registered by the Super I/O.
    Try checking a few things:
    1. If you have connected the sensor correctly
    2. If the sensor is still functional
    Thanks for the reply but I'm still confused about " not being registered by the Super I/O" .
    I'm not that good when it comes to everything on the motherboard.
    Sorry.
    ASUS MAXIMUS VII HERO LGA 1150
    Intel Core i7-4790K Quad-Core Desktop Processor (4.0 GHz)
    Corsair Hydro Series H110i CPU Cooler
    MSI GTX 970 4GB Twin Frozer V
    500GB SSD, 2TB WD
    G.SKILL Trident X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600
    (PC3 12800)
    Corsair RM 1000W 80 Plus Gold Fully Modular Cables
    Graphite Series 760T Black Version Full-Tower Windowed

  4. #4
    Moderator Array
    Join Date
    Jun 2016
    Reputation
    10
    Posts
    241

    Quote Originally Posted by Leadbelly1978 View Post
    Thanks for the reply but I'm still confused about " not being registered by the Super I/O" .
    I'm not that good when it comes to everything on the motherboard.
    Sorry.
    In simple terms, the thermistor on the cable you have connected cannot be detected by the hardware monitor controller on the motherboard.
    Try checking if that cable is faulty and properly connected, then it should be detectable under BIOS.

  5. #5
    ROG Enthusiast Array Leadbelly1978 PC Specs
    Leadbelly1978 PC Specs
    MotherboardASUS MAXIMUS VI HERO LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    ProcessorIntel Core i7-4770K Quad-Core Desktop Processor (3.5 GHz)
    Memory (part number)Corsair Vengeance 16GB (2x8) DDR3 1600 MHz
    Graphics Card #1MSI GTX 970 4GB Twin Frozer V
    Storage #1500GB SSD
    Storage #22TB Western Digital Green
    CPU CoolerCorsair Hydro Series H110i CPU Cooler
    CaseGraphite Series 760T Black Version Full-Tower Windowed
    Leadbelly1978's Avatar
    Join Date
    Nov 2014
    Reputation
    10
    Posts
    48

    Quote Originally Posted by ASUS-OP View Post
    In simple terms, the thermistor on the cable you have connected cannot be detected by the hardware monitor controller on the motherboard.
    Try checking if that cable is faulty and properly connected, then it should be detectable under BIOS.
    Thank you so much.
    I'll double check the wires later today, but I'm 95% that they all working fine.
    But thanks a lot again.
    ASUS MAXIMUS VII HERO LGA 1150
    Intel Core i7-4790K Quad-Core Desktop Processor (4.0 GHz)
    Corsair Hydro Series H110i CPU Cooler
    MSI GTX 970 4GB Twin Frozer V
    500GB SSD, 2TB WD
    G.SKILL Trident X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600
    (PC3 12800)
    Corsair RM 1000W 80 Plus Gold Fully Modular Cables
    Graphite Series 760T Black Version Full-Tower Windowed

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •