Rampage V Edition 10 Memory Qualified vendor list updated (August 2016)

[Catalonia]

Finally Asus is testing more modules and they've just released a new Qualified Vendor List up to 3.333MHz

http://dlcdnet.asus.com/pub/ASUS/mb/...535.1382204625


My G.Skill Modules (which are on the way for tomorrow) appear here: F4-3200C14Q-32GTZ

3.200MHZ 14 14 14 34

Now I'm a bit more confident about installing the modules, enable XMP and have them at the right Speed and timings.

[Psychor]

Finally Asus is testing more modules and they've just released a new Qualified Vendor List up to 3.333MHz

http://dlcdnet.asus.com/pub/ASUS/mb/...535.1382204625


My G.Skill Modules (which are on the way for tomorrow) appear here: F4-3200C14Q-32GTZ

3.200MHZ 14 14 14 34

Now I'm a bit more confident about installing the modules, enable XMP and have them at the right Speed and timings.

Nice, but technically the F4-3200C14Q-32GTZSW aren't listed on the ASUS report.

I recently picked up a F4-3200C14Q-32GTZSW kit from Newegg. Just getting around to testing it now in a R5E E10. Interestingly enough GSKILL lists this kit as being compatible on their site: http://gskill.com/en/product/f4-3200c14q-32gtzsw (click on the QVL tab).

[Chino]

As always, it all comes down to the CPU's IMC. Prepare to manually tweak for stability if need be.

[Catalonia]

Nice, but technically the F4-3200C14Q-32GTZSW aren't listed on the ASUS report.

I recently picked up a F4-3200C14Q-32GTZSW kit from Newegg. Just getting around to testing it now in a R5E E10. Interestingly enough GSKILL lists this kit as being compatible on their site: http://gskill.com/en/product/f4-3200c14q-32gtzsw (click on the QVL tab).

Just for the record, I've installed my modules, F4-3200C14Q-32GTZ and yes, XMP worked out of the box for speed and timings. But I used to have the Corsair at 3000 and the new XMP profile changed the BLOCK from 125 back to 100, and I do get a bit lower speed in PCMark. Strange...

[Vlada011]

This is very important.
Great because ASUS update memory QVL list, It's not same when you need to pay for memory if no one test on same board.

Example best price/performance at the moment was this kit...

http://www.gskill.com/en/product/f4-3200c14q-32gtz

But GSkill only confirm for Z170 boards. But kit is probably excellent and no reason to make problem on X99.
14-14-14 timmings. Price is around 220e. I think best option at the moment for Broadwell-EX/X99 and now ASUS confirm on their list.

[Catalonia]

This is very important.
Great because ASUS update memory QVL list, It's not same when you need to pay for memory if no one test on same board.

Example best price/performance at the moment was this kit...

http://www.gskill.com/en/product/f4-3200c14q-32gtz

But GSkill only confirm for Z170 boards. But kit is probably excellent and no reason to make problem on X99.
14-14-14 timmings. Price is around 220e. I think best option at the moment for Broadwell-EX/X99 and now ASUS confirm on their list.

100% agree. I own this G.Skill and I can have them at 3.300 at 14-14-14 in 1.35v using XMP and only increasing the clock speed. So easy, yet so good.

[Psychor]

Just finished running HCI MemTest with my new F4-3200C14Q-32GTZSW kit set to XMP. It took over 24 hours, but it was a success!!!

[Morkrah]

Hey guys, I just got this board and some F4-3200C14Q-32GTZR - exactly the same as F4-3200C14Q-32GTZ just with the RGB.

I've coupled it with a 5930k.

I'm trying to get xmp to work but so far no luck getting a post with it enabled.

Any tips?

Many thanks!