©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Zarathustraa · ‎08-26-2016

On occasion I get three minute boot times(usually about 30 seconds) till I power cycle the RVE. If I remember correctly the last time this happened the chip was on the way out. I haven't overclocked this time, and actually swapped out for a different RVE. I'm just curious if there's any voltages I should remove from the auto settings, or any other treatments.

Avenger411 · ‎08-26-2016

Hey,

The board probably hangs on a qcode. I'd bet because of an usb device. What qcodes do you see ?

Max

Cpu : Intel 5930K@4.25ghz@1.2v / Cache @4.25ghz@1.20v
Cpu Cooler : Corsair H100i
Case : Corsair 780T
Memory : G.Skills 32GB DDR4-3200mhz CAS 15-15-15-35-1T@1.370v
Motherboard : Asus Rampage V Extreme (BIOS 3504)
M2 : Samsung 950 Pro NVME 512gb (Gaming)
M2 : SSD1 : OCZ RD400A 128gb (windows)
SSD1 : Crucial MX100 512gb (data)
Gfx : EVGA Titan X w/ 980 Hybrid Cooling AiO Liquid Cooler
PSU : Antec HCP-1000W
Monitor : Asus RoG Swift

Zarathustraa · ‎08-26-2016

I already flicked the power supply. I'll post again in a week. I get two hangs, one at the boot loader and a second at the OS start. Input doesn't work. I think the q code was 98?

Avenger411 · ‎08-26-2016

Hey

Whenever it hangs next time make sure you not down the qcodes. Had a friend with an old usb device that would trigger a "79" for 2mimutes. Annoying.

Max

Cpu : Intel 5930K@4.25ghz@1.2v / Cache @4.25ghz@1.20v
Cpu Cooler : Corsair H100i
Case : Corsair 780T
Memory : G.Skills 32GB DDR4-3200mhz CAS 15-15-15-35-1T@1.370v
Motherboard : Asus Rampage V Extreme (BIOS 3504)
M2 : Samsung 950 Pro NVME 512gb (Gaming)
M2 : SSD1 : OCZ RD400A 128gb (windows)
SSD1 : Crucial MX100 512gb (data)
Gfx : EVGA Titan X w/ 980 Hybrid Cooling AiO Liquid Cooler
PSU : Antec HCP-1000W
Monitor : Asus RoG Swift

Every now and then I have 3 minute boot times.