Results 1 to 2 of 2
  1. #1
    New ROGer Array unwytt PC Specs
    unwytt PC Specs
    Motherboardasus z170 gaming aura
    Processori5 6600k
    Graphics Card #1asus gtx 1050ti
    CPU Coolercorsair h60
    Casebitfenix comrade
    Power Supplycx750m
    OS win10

    Join Date
    Dec 2017

    Asus Ai Suite III PROBLEMS

    Hey, i was running into a problem when booting my pc yesterday.. the gpufanhelper app would ask for permission obviously id grant it but then id get some error message.. as i looked into it people said to reinstall it.. although that never worked because every time i run the install it asks me if i want to delete all the files...

    i then proceeded to boot up my add and remove programs and delete AI suite from there.. still no success so finally i looked into how to manually remove every last bit of the program and i followed this guys guide:

    If you dont want to go to that thread heres what was told to be done:
    Step 1: Open Task Manager – End the following Processes
    Stop the following Services
    aS HmComSvc

    Step 2: Go to C:\ProgramFiles(x86)\ASUS\ and erase all programs

    the issue is that i cannot erase these programs because they are still in use even after ive disabled and or stopped all the processes in the task manager..
    if Ai Suite isnt really needed then i wont continue on with this pain in the a** but id still enjoy to have it wiped from my PC any help would be great.
    Also, ive already used CCleaner and im not aware if im using it wrong but it hasnt deleted these files either..

    even if i reinstall ai suite i still get these messages :
    "class not resistered, progID: "atkexcom.axdata" from both the Aisuite3 and Dipawaymode
    Last edited by unwytt; 01-01-2018 at 07:29 PM.

  2. #2
    ROG Guru: Yellow Belt Array cekeu PC Specs
    cekeu PC Specs
    MotherboardROG Rampage VI Extreme Encore
    ProcessorIntel Core i9-10920X
    Graphics Card #1ROG STRIX GeForce RTX 3080 Ti
    MonitorROG SWIFT PG27UQ
    Keyboard ROG Strix Flare
    Mouse ROG Chakram Core

    Join Date
    Jun 2013

    Personally I would choose in this case to reset the system:
    Settings/update and security/recovery/reset this PC..........Only the disk on which the system is installed.
    And if you upgrade the system to every new version of Windows 10, I do not advise you to use dip (Dual Intelligent Processor). Uncheck the dip installation when installing AI Suite 3.
    Prefer to set up your components by the BIOS, This will be 100% stable.
    The problem you are experiencing with gpufanhelper is known since with the update of Windows Creator update.
    Last edited by cekeu; 01-02-2018 at 05:38 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts