Results 1 to 2 of 2
  1. #1
    ROG Guru: White Belt Array ali├╝nl├╝ PC Specs
    ali├╝nl├╝ PC Specs
    Laptop (Model)none
    MotherboardRampage IV Black Edition
    Processori7 4930 K
    Memory (part number)CMZ16GX3M2A1600C9
    Graphics Card #1Asus Titan X ( maxwell )
    Graphics Card #2none
    Graphics Card #3none
    Graphics Card #4none
    Sound Cardonboard
    MonitorAsus VG248QE
    Storage #11.Corsair Force GS (240 gB) 2.Corsair Force GS (128 gB) 3.Corsair Force LS SSD (240 gB
    Storage #2Seagate 1tB
    CPU CoolerCooler Master: Seidon 240M
    CaseCooler Master Sniper
    Power Supply1500w silverstone
    Keyboard Logitech G510
    Mouse Logitech G502
    Headset Creative sound blaster Alpha Tactic 3D
    Mouse Pad none
    Headset/Speakers Creative T6300 5+1 Speaker
    OS Windows 10 pro 64 bit
    Network Routernone
    Accessory #1 Logitech HD Webcam C615
    ali├╝nl├╝'s Avatar
    Join Date
    Aug 2013
    Reputation
    10
    Posts
    108

    Rampage IV Black Edition EZ quick OC problem

    Hi ! i have got a problem for EZ mode. i have rampage IV black edition 4930 K cpu and 1500 W psu and win 10 . I chose to asus optimal from EZ mode (cpu fix to 4500 mHz
    9 and when i restart to pc it work for 2 or 3 second and stop and then start again. Bios is uptodate. sorry for my bad English.
    Last edited by ali├╝nl├╝; 10-07-2016 at 08:46 AM.

  2. #2
    ROG Enthusiast Array gustmi4 PC Specs
    gustmi4 PC Specs
    Laptop (Model)Asus CM 200 Chromebook, HP Chromebook 14 (second gen), Lenovo T400
    MotherboardAsus Z170-A
    ProcessorI5-6600K
    Memory (part number)Kingston HyperX Fury DDR4 2666 MHz 16GB
    Graphics Card #1Gigabyte 980Ti G1 Gaming
    MonitorAsus VE228 21,5"
    Storage #1Corsair Force LE 240GB
    Storage #2Kingston HyperX 120GB, Intel 330 120GB
    CPU CoolerNoctua NH-U12S
    CaseFractal Design R4
    Power SupplyEVGA SuperNOVA 750w G2
    Headset AKG K702, Steelseries, Logitech
    OS Win 10 Pro 64-bit

    Join Date
    Sep 2016
    Reputation
    10
    Posts
    51

    A bummer EZ Mode didn't work. All CPU's have different maximum overclock speeds and it's not always an easy road.
    I don't claim to be an expert on overclocking, but here's some info to start with.


    First do a stress test and see how your cpu is doing on stock settings:

    For stabilty/stress testing there's RealBench (http://rog.asus.com/articles/news/re...available-now/), Prime95 (use version 2.66 and NOT newer, because it can overheat your processor), Intel XTU (https://downloadcenter.intel.com/dow...ity-Intel-XTU-)
    Run the stress test for at least 20min's to begin with and monitor your temperatures using RealTemp (https://www.techpowerup.com/download...nfo/Real_Temp/), CoreTemp (http://www.alcpu.com/CoreTemp/), HWInfo ((be sure to download the 64bit version) https://www.fosshub.com/HWiNFO.html) or similar.
    Do this for every different overclock you try.

    ABORT THE STRESSTEST AND DOWNCLOCK IF THE TEMPS GO OVER 80-85!
    For longer time usage under normal load you should try to stay at max. 75 degrees. (Gaming, Encoding for long times etc.) You can use AfterBurner to monitor temps while in game, it can also be used for logging. Here's Nate152's guide on AfterBurners OSD: https://rog.asus.com/forum/showthrea...Screen-Display


    If you want to try another utility for automatic overclocking, you can use the Intel XTU software which was mentioned in the stress test part. (https://downloadcenter.intel.com/dow...ity-Intel-XTU-)




    These two threads could give you some info if you want to try manual overclocking:

    https://rog.asus.com/forum/showthrea...tion&highlight

    https://rog.asus.com/forum/showthrea...4930k-on-rivbe



    You should try to up your speed in small steps and see how high a frequency you can get to before temperature or instability becomes a problem.



    From Raja's overclocking guide:

    First of all, the same as I already said:
    "Standard disclaimer: Overclocking is not guaranteed to work, or guaranteed to be reliable. Do so at your own risk."

    1) The first thing to do after applying the overclock is to complete some form of stability testing within the operating system. There are a multitude of programs available to do this, and each has its merits/shortcomings. Running a variety of different stress tests and applications is recommended to gauge system stability.


    2) Check CPU and system temperatures under load are not too hot. At higher temps, the system is more prone to instability. We recommend keeping the CPU core temperature below 75C under maximum load.

    3) If your cooling and CPU is up to the task, then you may wish to overclock the system further. Either way, we starting at 4.3GHz, and tuning VCore to itĺs lowest stable point first. The lowest stable point is where the system can reliably pass all stability tests. I usually find the lowest Vcore the system will pass all stress tests at and then add +0.02V to Vcore for good measure.

    From there, increase the CPU ratio in +1 steps, and keep an eye on how much Vcore you need to add to get the system stable. Check CPU temperatures under load also. At the point where one needs a big increase of Vcore for another 100MHz in CPU frequency, itĺs wise to back down to the lower ratio and run a lower frequency. We can call this the M.E.P. ľ most effective point. Each CPU has one. Running an overclock at the CPU's "MEP", ensures that current consumption does not become excessive and itĺs kinder to the silicon. On top of that, a paltry 100MHz increase in frequency is not worth the extra power it takes to obtain ľ the performance "improvement" is not worth it in my view.




    -Mikael

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •