Page 2 of 2 FirstFirst 1 2
Results 11 to 14 of 14
  1. #11
    ROG Enthusiast Array
    Join Date
    Apr 2015
    Reputation
    10
    Posts
    59

    UPDATE

    "so near and yet so far": D January was unfortunately a bit more work intensive than I had planned, so I managed to work less at this and last week I was ill..

    The processor fot this setup is i5 6600K.



    Hopefully it will be good piece




    The loop I have planned differently,and then I threw the whole concept and try to do it as simply as possible.



    But still I try to do pipes straight as possible.



    I decided to polish the SLI Bitspower bridge.



    Polished version looks much better than the frosted one - the overall strangely reflected light was very bright.





    Anyway, with the water inside it will look completely different again


  2. #12
    ROG Enthusiast Array
    Join Date
    Apr 2015
    Reputation
    10
    Posts
    59

    UPDATE

    This pink beast will be finished soon!!

    As the last piece of HW was disk - I decided to use the HyperX SSD 480 GB.



    Installation of disks (2.5 "and 3.5") in this case there is a nice and easy. I also try to keep some nice cable management.



    The current view of the front. Missing just finished loop and power for vgas.



    I made some changes to the loop and now graphics card will run in serial.



    For serial connection must be put into such a small stop fiting.





    Power for VGAs. With that I also played for a while and tried variations, but this is the cleanest.







    On the inside the LEDs lighting strip, but to have a profile with frosted plexiglass.





    SSD I finally placed into the bottom position.



    And this looks like the back part of the current.



    Front - missing only to finish loop and its finished! more soon


  3. #13
    ROG Enthusiast Array
    Join Date
    Apr 2015
    Reputation
    10
    Posts
    59

    UPDATE

    For mounting Alu profile for LEDs I have to dissasemble the case a bit.



    Alu profile is on 2 countersunk M3x5





    Finally the cover for the SLI bridge is finished too. Matte black with some pink touch and ASUS sticker - I guess I have it from ASUS VII Impact.



    Only few tubes connect and it is!





    Tube will be hidden behind the fans.



    I have change all orings on the fittings for black.



    Ready, just put the radiator in the case and connect with tubing.







    I also changed my mind one more time about the loop



    These fittings from Bitspower are perfect to work with! Awesome product imo.





    Actual. Finished sooon!


  4. #14
    ROG Enthusiast Array
    Join Date
    Apr 2015
    Reputation
    10
    Posts
    59

    FINISHED!






































Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •