RVE10 Updates?

[Menthol]

vmanuelgm,
On the RVE I never had any issues with sli, and M.2, and a Intel 750 in bottom X16 slot,
On RVE-10 if you have an M.2 drive and a PCIE drive in bottom slot I believe the GPU runs at 3.0X8, if you put the pcie drive in 3rd X16 slot GPU runs at 3.0X16
A couple months ago I was benching multiple Titan Pascal cards and had difficulties getting all cards to run at 3.0 and set 3.0 in bios, I entered the Realbench competition on HWBOT and started switching hardware around for the competition and can't remember if I ever figured out the issue or not, not sure if it was a Windows update or a setting in bios but running multiple pcie drives may be your issue, I had a Plextor m8pe drive that failed on me and was moving it to different slots for testing and benchmarks on that drive changed depending on which slot, very strange, I contacted Plextor and got a strange explanation from them, only use Crystal disk Mark to test their drive but I still got different readings depending which pcie slot the drive was in, I will look in my bios to see if I have 3.0 enabled or not

Any way if your objective is pcie drives and M.2 drive as in your signature, the RVE is better than the RV-E10 as the new board added the USB 3.1 and lanes are allocated differently

[vmanuelgm]

vmanuelgm,
On the RVE I never had any issues with sli, and M.2, and a Intel 750 in bottom X16 slot,
On RVE-10 if you have an M.2 drive and a PCIE drive in bottom slot I believe the GPU runs at 3.0X8, if you put the pcie drive in 3rd X16 slot GPU runs at 3.0X16
A couple months ago I was benching multiple Titan Pascal cards and had difficulties getting all cards to run at 3.0 and set 3.0 in bios, I entered the Realbench competition on HWBOT and started switching hardware around for the competition and can't remember if I ever figured out the issue or not, not sure if it was a Windows update or a setting in bios but running multiple pcie drives may be your issue, I had a Plextor m8pe drive that failed on me and was moving it to different slots for testing and benchmarks on that drive changed depending on which slot, very strange, I contacted Plextor and got a strange explanation from them, only use Crystal disk Mark to test their drive but I still got different readings depending which pcie slot the drive was in, I will look in my bios to see if I have 3.0 enabled or not

Any way if your objective is pcie drives and M.2 drive as in your signature, the RVE is better than the RV-E10 as the new board added the USB 3.1 and lanes are allocated differently

Thanks for your reply, Menthol.

Maybe the issue comes, as you say, from Intel 750's and SM951. Could a bios revision solve this, what do you think???