cancel
Showing results for 
Search instead for 
Did you mean: 

BIOS USB settings

Swiso
Level 9
Hello,
I would like to ask for help in regard to what options I should set for the USB settings in the UEFI BIOS.
I have BIOS 3101 and I just updated the USB 3.0 drivers for both Intel and ASMedia.
I use some device for gaming....like the Thrustmaster Warthog, the CH Products Eclipe Yoke and Rudder Pro Pedals..
It happen that sometime if I left connected one of these devices (not always the same and/or in the same port), next time I turn on the PC, it dosent boot....it hang...
The only option to turn on the PC normally is to press the Clear CMOS on the back panel, enter the UEFI BIOS and reset all the parameters..

These are the options that I have right now: (I have Windows 7 Ultimate 64bit)
ADVANCED: "USB Configuration" menu:
-Intel xHCI Mode: AUTO
-EHCI Legacy Support: ENABLED
-xHCI Hand Off: ENABLED
-EHCI Hand Off: DISABLED

"USB Single Ports Control":
-all the ports are enabled

BOOT menu:
-USB Support: PARTIAL INITIALISATION

Thanks for any suggestion and help.
7,014 Views
1 REPLY 1