Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Team Group RAM settings

timbo2410
Level 7

‎12-13-2016 11:30 AM - last edited on ‎03-06-2024 01:22 AM by Community Admin

Can somebody please talk me through getting my Team Group 3733mhz ram back up to full speed again.
Mobo: ROG Maximus viii Extreme (bios 2202).
Labels:
0 Kudos
5,669 Views
16 REPLIES 16

Chino
Level 15

‎12-14-2016 02:09 PM

Try enabling XMP first. You might get lucky and won't need user intervention to get them stable.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

timbo2410
Level 7
In response to Chino

‎12-14-2016 02:53 PM

yep tracked down my old thread and it was just a case enable XMP and then alter T2 to T1 .. where is that located in bios as I just cant find it?
0 Kudos

timbo2410
Level 7

‎12-14-2016 02:25 PM

Thanks for the reply Chino. Yep tried that and just get error 55 on mobo. I'm sure that when I initially got the ram up to 3733 (last December) that I had to select T1 or T2 somewhere in the bios. Can't find where that is though. The 3733 is supported and I know it works at that speed.
0 Kudos

MeanMachine
Level 13

‎12-14-2016 03:24 PM

To change from T2-T1 go to Extreme Tweaker menu>DRAM Timing Control. Scroll down to DRAM Command Rate.
We owe our existence to the scum of the earth, Cyanobacteria

My System Specs:

MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
CPU:AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t
Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2

[/HR]
0 Kudos

timbo2410
Level 7

‎12-15-2016 01:09 AM

Set "1" in command rate and with XMP set to ram speed (3733mhz) I still get error 55 ... do I need to start altering voltages? I didn't have to do that prior to the bios update?
0 Kudos

timbo2410
Level 7

‎12-15-2016 04:23 AM

started at 3600mhz and it's booted into windows just fine. Should i be happy with this or try to reach 3733? If not, what to alter from here on in? I have XMP enabled and the cpu overclock to 4.6. What test do I run now for stability
0 Kudos

MeanMachine
Level 13

‎12-15-2016 05:32 AM

I would be happy with 3600MHz and 3733Mhz is a lot to ask of your IMC. Very little difference and little to gain. If you want to try it but no guarantee.
Raise Dram current capability to top setting.

Try the Dram voltage at 1.38v - 1.42v
vccio voltage to 1.25v-1.30v
vccsa voltage to 1.30v - 1.35v

Realbench is the ultimate stress test. If you can pass that your stable.
We owe our existence to the scum of the earth, Cyanobacteria

My System Specs:

MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
CPU:AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t
Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2

[/HR]
0 Kudos

timbo2410
Level 7
In response to MeanMachine

‎12-15-2016 09:25 AM

had to try .. so annoying that I had 3733 with no trouble prior ..
0 Kudos

timbo2410
Level 7

‎12-15-2016 07:45 AM

ran realbench while at 3600mhz. Tested all ok. Increased voltages systematically from what you gave but failed to boot at 3733mhz each time.
0 Kudos