cancel
Showing results for 
Search instead for 
Did you mean: 

P8Z77.I Deluxe daughter board extra protection 3D print?

FireFlower
Level 9
Hello,

Is there any person who could make quick extra protection for Asus P8Z77-I Deluxe's VRM daughter board or could someone post a first timer 3D-print object designing guide? I have used google sketchup before to make plans how to build some furnitures and enclosures but 3D-printing is completely new to me. I can make free 3D prints at university but just need a good guide for oldie like me who still believes floppies are the best way to update BIOS.

I need to make a little bit extra protection for daughter board so my watercooling soft tubes stay clear from sharp edges.

-Cheers
Romuluotain 9
Ryzen 3600, MSI B450M Mortar Max, 2x16GB DDR4, GTX 1080 Ti, ~10TB total storage (good bye ROG, for n...
Romuluotain 8
Dell XT3, Core i7-2620M, 2x4GB DDR3-1600MHz sodimm, 2TB SSD, Sierra wireless LTE, AX200 Wifi-6, Linux Mint
13,230 Views
2 REPLIES 2

FireFlower
Level 9
Yah guess I will have to design that shield for VRM :rolleyes:
http://i.imgur.com/31CRCb7.jpg
Romuluotain 9
Ryzen 3600, MSI B450M Mortar Max, 2x16GB DDR4, GTX 1080 Ti, ~10TB total storage (good bye ROG, for n...
Romuluotain 8
Dell XT3, Core i7-2620M, 2x4GB DDR3-1600MHz sodimm, 2TB SSD, Sierra wireless LTE, AX200 Wifi-6, Linux Mint

Yeah, you should really consider http://3dinsider.com/3d-printing-guide/ for this issue. Here are some useful guides that can actually help and this is the cheapest way to deal with your problem.