02-23-2017 12:28 AM - last edited on 03-05-2024 10:36 PM by ROGBot
02-23-2017 01:03 AM
02-23-2017 01:36 AM
Silent Scone wrote:
Hi,
What Q-Code is displayed on the motherboard LED after attempting to POST with XMP enabled?
You can try both tweak modes from within the Maximus Tweak menu under DRAM Timing Control.
Try also setting a manual VCCIO and VCCSA voltage of 1.2v
02-23-2017 03:45 AM
Pailong wrote:
It was displaying code 01 and 03.
I just tried your suggestion of VCCIO and VCCSA of 1.2v each and it worked! Bios booted up fine, registering as 3000mhz ram! Thanks so much!
Can I ask - is 1.2v standard for this speed? Is it a good voltage for long term use? I'm still trying to learn more about OC'ing and understand this.*
02-23-2017 06:47 AM
brkkab123 wrote:
Also, make sure your ram is in the 2nd and fourth slot away from the cpu, not the first & third slots.
03-28-2017 03:04 PM
03-29-2017 08:34 AM