cancel
Showing results for 
Search instead for 
Did you mean: 

G.Skill 3600MHZ RGB with REV10

Phillyflyer
Level 10
Just to let folks know..G.Skill F4-3600X16D-16GTZR memory works without issues in XMP.
Timings can also be adjusted to 15/15/15/36 2T. No added voltages needed.
Will be getting 32GB quad kit !!!!!!
Asus ROG Maximus XI EXTREME
Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
Swiftech Drive II / Swiftech MCP35X Pump
Enermax Platimax 1200 Watt Power Supply
32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
(5)Samsung 840 Pro 128 GB In Raid 0
(2) WD 1TB Black Edition
Corsair 900 D
7,616 Views
15 REPLIES 15

Menthol
Level 14
I sure would like to see some screenshots of this

Menthol wrote:
I sure would like to see some screenshots of this



Would not post comment if it wasn't working...but will upload screenie if you desire.
Asus ROG Maximus XI EXTREME
Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
Swiftech Drive II / Swiftech MCP35X Pump
Enermax Platimax 1200 Watt Power Supply
32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
(5)Samsung 840 Pro 128 GB In Raid 0
(2) WD 1TB Black Edition
Corsair 900 D

Menthol
Level 14
Not saying it isn't possible but yes I do desire

Raja
Level 13
With your screenshot showing memory frequency and timings, be sure to include the Windows Task Manager showing the Performance Tab memory section.

Raja@ASUS wrote:
With your screenshot showing memory frequency and timings, be sure to include the Windows Task Manager showing the Performance Tab memory section.


Here is the Screenie :

http://i1380.photobucket.com/albums/ah194/Phillyflyer16/GSKILL%203600MHZ_zpsgiaq7bj9.jpg
Asus ROG Maximus XI EXTREME
Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
Swiftech Drive II / Swiftech MCP35X Pump
Enermax Platimax 1200 Watt Power Supply
32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
(5)Samsung 840 Pro 128 GB In Raid 0
(2) WD 1TB Black Edition
Corsair 900 D

Menthol
Level 14
Phillyflyer,
Thanks, I have a 4 of the modules you list but have never intentionally installed them on my RVE, or RVE10, but I have unintentionally installed them and ran them at the same 3400 speed that I run my GSkill 3200 C14 kits and didn't realize that I did so at first. you do know I have other questions now,
bios settings,
just set XMP? other bios settings needed?
Stability?
AIDA memory bandwidth reading, memtest stability test
If this is not to much trouble for you

Menthol wrote:
Phillyflyer,
Thanks, I have a 4 of the modules you list but have never intentionally installed them on my RVE, or RVE10, but I have unintentionally installed them and ran them at the same 3400 speed that I run my GSkill 3200 C14 kits and didn't realize that I did so at first. you do know I have other questions now,
bios settings,
just set XMP? other bios settings needed?
Stability?
AIDA memory bandwidth reading, memtest stability test
If this is not to much trouble for you




See....wasn't kidding !!!
Only thing I have noticed is that Windows Task Manager shows memory @ 3200MHz for whatever reason. G.Skill tech support also didn't believe it either so I forward same to them.
Will update what their reply is.
Yes....just set XMP with 1 stick installed initially....boot...then shutdown..add remaining 3 sticks...boot again.....and Voila !!!!
No other settings needed.
Asus ROG Maximus XI EXTREME
Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
Swiftech Drive II / Swiftech MCP35X Pump
Enermax Platimax 1200 Watt Power Supply
32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
(5)Samsung 840 Pro 128 GB In Raid 0
(2) WD 1TB Black Edition
Corsair 900 D

Praz
Level 13
Hello

Booting at 3600MHz with said timings isn't all that difficult. Successful completion of HCI/GSAT with acceptable voltages takes a bit of work though.

G.Skill Tech Support reply:

Windows Task Manager Performance shows memory 3200 MHz ..CPU.Z reports 3600MHz

" This is strange , may something with the OS. Use a memory benchmark test and confirm memory is indeed running DDR-4 3600MHz. Windows is not exactly designed for overclocking so it may be limited reporting value (max value)."
Asus ROG Maximus XI EXTREME
Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
Swiftech Drive II / Swiftech MCP35X Pump
Enermax Platimax 1200 Watt Power Supply
32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
(5)Samsung 840 Pro 128 GB In Raid 0
(2) WD 1TB Black Edition
Corsair 900 D