cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus Code and 7700k..

Matrixero
Level 7
Hello, I have this construction.
32gb ddr4 3200 trident z rgb
7700k OC 4.7
Maximus Code
Gtx 1080 asu strix

Use the Raja guide very easily by the way, I have problems with temperatures playing BF1 an hour I had temperatures of 80 ° C in one of the cores ..
OC 4.7 adaptive vcore 1.25, load line calibration in auto
Cooler h220x2 prestige Swiftech. It may be missing some more settings?
I use the installer cpu that comes with the asus board, would not that cause some problem when installing the cooler? Is that first time I use it
I read in overclock.net that touching PLL lower temperatures a bit but in Asrock plates, this would be good for asus too?

thanks.
1,942 Views
2 REPLIES 2

Nate152
Moderator
Hello Matrixero

Yeah your temps are high for just gaming, max temp you want to see is 64c.

Try setting LLC to level 4.

You could reapply the thermal paste and remount your cooler, while you're doing that you could remove the cpu installer tool to see if that lowers temps.

Chino
Level 15
Verify your cooler installation and if it's functioning correctly. Your temperatures seem awefully high for 1.25V on a 240mm AIO.