03-03-2017 10:09 AM - last edited on 03-05-2024 10:40 PM by ROGBot
03-03-2017 11:06 AM
Exoplast wrote:
Hi everybody ,
i have seen that many poeple have problem with that Board when they first start it . So i have decided to write a small Guide.
This guide listing the Steps that i have done when my Cpu and Board have arrived (only the Steps ).
1. Download the newest Stable Bios from the support Site ( not the Beta Bios 5704 it has an thermal sensor bug )
http://dlcdnet.asus.com/pub/ASUS/mb/SocketAM4/CROSSHAIR-VI-HERO/CROSSHAIR-VI-HERO-ASUS-0702.zip?_ga=...
2. Unrar the archieve and rename the .cab file to C6H.cab . After that that you put the .cab file to your usb stick and stick the stick the UsB-Drive to the UsB-Port that is called Bios (have a white Square around it . After that you must click the flashbackkey at the backside of your board . Wait till it have completly stop blinking (can took some minutes) . After that click the clear cmos Button .
3. Now your Board is ready to start with the Ryzen CPU . So you can install all your components to the Borad . Make sure all cables are connected correctly .
4. Press F2 or the del key to go in the Bios and do the usual thing there. :cool: If you have done you settings save it .
5 . Now you can install your Windows. After that install the drivers from the support Website https://www.asus.com/Motherboards/ROG-CROSSHAIR-VI-HERO/HelpDesk_Download/.
6. Now you have finished the work and can have fun with the ryzen .
Cheers exoplast
03-03-2017 11:35 AM
Praz wrote:
Hello
All guides should be accurate. The file extension is CAP not CAB.
03-19-2017 09:15 PM
03-19-2017 10:55 PM
SubnetMask wrote:
Dumb question - can the flashback option be used without CPU or RAM installed? I started building PCs back in the day when you needed a CPU and RAM to even start to post or flash the BIOS - so you were in a world of hurt if for some reason your latest version of the CPU was totally incompatible with the BIOS revision your new board had installed. But from some things I've seen, it sounds like flashback will work with just a bare MB that is getting the appropriate power - is this the case, or am I just reading into it wrong?
Exoplast wrote:
Hi everybody ,
1. Download the newest Stable Bios from the support Site ( not the Beta Bios 5704 it has an thermal sensor bug )
http://dlcdnet.asus.com/pub/ASUS/mb/SocketAM4/CROSSHAIR-VI-HERO/CROSSHAIR-VI-HERO-ASUS-0702.zip?_ga=...
03-21-2017 01:42 PM
syldon wrote:
Link does not work. If there is a bios update that may work then I would like to try it out. Fix the link please. Also please state which bios version it is.