©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

cimbri · ‎03-16-2017

Hi to all. First of all english is not my native language. I hope i m posting in proper section.
I need advice. I spend a lot of time on internet finding proper cooling system. But no luck. Dont understand most of fittings. What im trying to do is to build custom case with W/C.
My configuration is formula IV with AMD 1090T kingston 4x4 gb. Asus strix 470. If some can made me list what do i need. Beside this should i go with tubes or pipes.
Tnx.

Zka17 · ‎03-17-2017

You may start here: https://www.ekwb.com/custom-loop-configurator/
Tubes or pipes - has no relevance for performance, it's just esthetics...

cimbri · ‎03-18-2017

Zka17 wrote:
You may start here: https://www.ekwb.com/custom-loop-configurator/
Tubes or pipes - has no relevance for performance, it's just esthetics...

Tnx

Menthol · ‎03-19-2017

I have never used hard tubing myself, it looks better but is more difficult to build, you may be spending more for cooling than the cost of your system

cimbri · ‎03-20-2017

Menthol wrote:
I have never used hard tubing myself, it looks better but is more difficult to build, you may be spending more for cooling than the cost of your system

Tnx for info

ottoyu34 · ‎03-21-2017

Your system case will determine what size of radiator you can install, there are different thickness of radiator so you have to make sure the combined thickness with 25mm fans will clear any system components.

Waterblock is pretty self-explanatory, you will have get one that is compatliable with your socket.

FIttings is all about outer and inner diameter.

Watercooling build