Crosshair VI Hero: UEFI build update thread

[mito1172]

My Corsair Gaming K70 LUX keyboard scroll lock led flashes in bios and during post but stops flashing once Windows 10 begins to load. Upon restart (after flashing the bios with flashback) I entered bios and used the keyboard just fine (light still flashing) without having to move the switch at the back of the kb; however, it wouldn't enter bios 3 times while holding down the del key until I moved the switch to BIOS, afterwards.

My mouse doesn't work at all either. If something as obvious as this can be missed, it doesn't exactly inspire great confidence in the quality of this bios 'update'. This is not premium level support. I find it baffling that something this obvious could be missed. The quality control just isn't a priority if bugs like this can make their way into a final release bios.

yes my mouse does not work on the bios screen

[Alessio1989]

mine works, 1MHz polling rate, connected to a CPU I/O BUS USB 3.0 port. Are you all using a 2.0 or a 3.0 SB port?

[Deflated]

mine works, 1MHz polling rate, connected to a CPU I/O BUS USB 3.0 port. Are you all using a 2.0 or a 3.0 SB port?

USB 3.0. Bottom row of ports. Keyboard direct connection. Mouse connects to BenQ monitor (USB on the underside). A hub cable from the monitor runs to the rear of mb. Mouse is on a cable; not wireless.

I have gone back to 7003 and everything is fine again.

[XxTripleBeamxX]

My Corsair Gaming K70 LUX keyboard scroll lock led flashes in bios and during post but stops flashing once Windows 10 begins to load. Upon restart (after flashing the bios with flashback) I entered bios and used the keyboard just fine (light still flashing) without having to move the switch at the back of the kb; however, it wouldn't enter bios 3 times while holding down the del key until I moved the switch to BIOS, afterwards.

My mouse doesn't work at all either. If something as obvious as this can be missed, it doesn't exactly inspire great confidence in the quality of this bios 'update'. This is not premium level support. I find it baffling that something this obvious could be missed. The quality control just isn't a priority if bugs like this can make their way into a final release bios.

Unable to use my mouse as well after flashing to the new BIOS 7106. I had to use the arrow keys on my keyboard to navigate around and change settings but am unable to change my fan settings as it HAS to use the mouse to navigate to each fan.

[Trylen]

Corsair K95 RGB + M65 RGB and same issue. Switch to Bios on the keyboard to get into bios and no mouse support. I guess I'm still used to the pre-uEFI days where keyboard only was a thing. I use the 2.0 ports for headset, keyboard, mouse old habits I guess.

[Deflated]

Unable to use my mouse as well after flashing to the new BIOS 7106. I had to use the arrow keys on my keyboard to navigate around and change settings but am unable to change my fan settings as it HAS to use the mouse to navigate to each fan.

You can set fan values manually with a keyboard using a dropdown list of fan profile choices. Under Monitor\Q-Fan Configuration, down at the bottom. There is Q-Fan Tuning and Chassis fan(s) Configuration too on the next page.

[Alessio1989]

USB 3.0. Bottom row of ports. Keyboard direct connection. Mouse connects to BenQ monitor (USB on the underside). A hub cable from the monitor runs to the rear of mb. Mouse is on a cable; not wireless.

I have gone back to 7003 and everything is fine again.

Try to move them onto top blue raw, those 4 ports should be connected directly to the CPU I/O and not to the SB chipset. I have both my old razer mouse (lachesis 4000 dpi, 1MHz polling rate) and my CM Storm Trigger-Z connected to the CPU I/O Ports. Both work without issue with the last BIOS.

[Ravwyn]

Any news on the "proper" 1.0.0.3AB AGESA for this board? the latest bios (Version 7106) is causing several issues plus has an older, somewhat weird AGESA - and I'll fully intend on skipping it. So Asus, can someone chime in?

[Ryo_z]

any update when asus is going to release the bios with latest 1.0.0.3AB AGESA?

version 7106 is not working fine with ZEN2. https://www.overclock.net/forum/11-a...l#post28029716

[Hinkan]

My Corsair Gaming K70 LUX keyboard scroll lock led flashes in bios and during post but stops flashing once Windows 10 begins to load. Upon restart (after flashing the bios with flashback) I entered bios and used the keyboard just fine (light still flashing) without having to move the switch at the back of the kb; however, it wouldn't enter bios 3 times while holding down the del key until I moved the switch to BIOS, afterwards.

Same problem for me, but with K68 on a B450-f board, seems they messed up several bios. I could not even boot up my computer at first because I use AIO-header instead of CPU, and needed to get into BIOS to set CPU-fan on ignore. Thankfully I got one old 6GV2 that did work. ****ing mess.