Crosshair VI Hero: UEFI build update thread

[JohnnyKurzschluss]

The BCLK bug after S3 sleep is real.

Whoever programmed this should try C#.
(No, please don't. I'm trying to be funny.)

I've been playing there and the issue has vanished somehow (according to /proc/cpuinfo)

But my system froze few times on 6001 when i was away...
not sure whether my VM was up or not

I'd like to see some more OC on my system but i think the thermal conditions are too rough

[FoxTech]

Could you send me your all bios settings at 4ghz in 3008 bios? Thanks!

Hello!

Will do so. I have them stored somewhere.
As soon as I have found em, I'll send them your way.

If you want to use my settings 1 to 1, it probably wont work for you.
Every chip is different and every ram kit aswell.

I haven't changed much in the Bios. I guess, I grabed a good chip.

[AfterShock]

Hello!

Will do so. I have them stored somewhere.
As soon as I have found em, I'll send them your way.

If you want to use my settings 1 to 1, it probably wont work for you.
Every chip is different and every ram kit aswell.

I haven't changed much in the Bios. I guess, I grabed a good chip.

I too would like to see your settings, I was able to get 4ghz stable when I got this board but 2 bios revs later it wasn't stable anymore.

[DJ Bully]

As far as I can tell, the best BIOS for Gen 1 Ryzen is 3008, after that they started to optimize for Ryzen 2. Because of this you need to add more Volts to keep the same clocks as before. If you are already close to the limit then it's curtains!

So with Gen 1 Ryzen I would not update past 3008.

I'm currently on 6001 (latest) but am considering going back.

[FoxTech]

I switched to 6001 yesterday, because I got new Memory. (Corsair Dominator Platinum 3466Mhz)
They run at 3333Mhz with 16-17-17-17-35-51 Timings
3466Mhz not possible to boot. I tryed timings up to 21 *lol*

I was looking for the 3008 Bios file for you guys but wasn't able to find them.
I may have formated the USB Stick.

I'm also thinking to switching back to 3008
6001 has some issues with the voltage settings. Not sure, if AGESA update from 3008 to 3502 made any differnce.
With 6001 I get constant BSOD while surfing or working. Its anoying =(

If Ryzen2 will become better... realy better, I may switch to the new one. Maybe ;-)

Update

I switched back to 3008 because of the voltage issue.
Unfortunately my Dominator Platinum wont run @ 3333Mhz again.
3200 are working with "usable" timings.

I hope, the official version of the Bios 6001 will work proper, so I can use it without watching temps and voltages all the time.

[BlackBishop]

FYI

Test BIOS 0001 with AGESA 1.0.0.2a for C6H, official beta will follow if no major issues are found (including C6HWIFI/C6E).

http://www.mediafire.com/file/x22uon...-ASUS-0001.zip

SHA256 4d22d089971b385a5356751d0bb5600b07c631b38420325dcd 5b8b50ed8b5742

- Sleep/resume timer issues when overclocking fixed
- OS frequency reporting when overclocking back to normal
- SIO sensor/fan fix not yet implemented
- HPET disable option in BIOS not yet implemented

[DJ Bully]

I switched to 6001 yesterday, because I got new Memory. (Corsair Dominator Platinum 3466Mhz)
They run at 3333Mhz with 16-17-17-17-35-51 Timings
3466Mhz not possible to boot. I tryed timings up to 21 *lol*

Why not get some samsung B-die memory like most G.skill/flare X sets, 8 Pack team group etc 3200 C14 pretty much guaranteed and probably capable of 3333 C14 or even 3466 C14 if your lucky.

That is how Ryzen fly's!

[FoxTech]

Hello DJ!

Well, a good question, I did not.
I stick again with 6001 and Ram @ 3333. 3008 wasn't working properly for some unknown reason.
Hell, my PC is fast enough with cl16.
Maybe, if price gets more "friendly" for memory, I switch again.

But I have another question to the community.
My 12V, 5V and 3,3V wont reach those numbers. I switched the PSU but still 11,2v to 11,8V (Bios and HWMonitor)
Is this only a inaccuracy reading or a problem with the board?
I get BSOD's from time to time in idle or under load. OS is fresh, drivers are up to date and M.2 + SSD's nearly empty.

chears Fox

[DJ Bully]

Hi Fox,
I find that my 12V, 3.3V & 5V are usually just a little over, rather than under. Have you checked voltages from HWINFO? It should be more accurate.

[FoxTech]

Yep, I checked it with HW Info + Bios

The Ryzen System of my wifey shows the voltage also a bit over than under.
Hmmm... Will check with a multi-meter