Page 219 of 267 FirstFirst ... 119 169 209 217 218 219 220 221 229 ... LastLast
Results 2,181 to 2,190 of 2664
  1. #2181
    ROG Enthusiast Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    46

    Quote Originally Posted by Red Core View Post
    A good update.
    Now my ram is supported, no oc and it goes its 3000 CL 14 14 14 34 48 1T.
    No cold boot problems or any others yet, it might be that the sound got better but i might be wrong.
    3,9Ghz seem to be still the best frequency for my 1800X with 1,35/1,375V and use 130Watt at 100% load aircooled.
    But the temperature offset is back, so far i see, i reach 74C, with my previous bios 6001, it was 54C.

    People that buy the 2700X, that was not a good idea, its in beta level!
    You have to wait a half year, to get it work probably. Better stick to your 1700/1700X/1800X meanwhile.

    I prefer to wait till the 7 or 5nm is avaible, to move from 14 to 12 is a small difference.
    Thanks for the info Red Core. Using my 1800X and will wait for solid bios for 2700X.

  2. #2182
    ROG Member Array
    Join Date
    Mar 2017
    Reputation
    10
    Posts
    18

    Quote Originally Posted by RobrPatty View Post
    Installed 2700X onto C6H and no post nothing. Put my 1800X back on and boom was up and running.6004. Upgraded to 6101 and 2700X still nothing...put back 1800X and away I go. WTF..bad processor?
    I had the same event and found a bent pin hiding on the 2700X. Like a surgeon I corrected it and it now boots fine. The only issue I have on the 6004 bios is bad temp readings for the CPU in 3rd party software like CAM. When I run the AMD RyzenMaster software or look in the bios the CPU temperatures are normal. I am getting 80-105C in CAM and other software. However the CPU is reacting as if the bios and ryzenmaster are correct. I have been able to overclock it to 4400mhz on all cores however it is very sensitive to extreme voltage draw. For example, when I run a benchmark that instantly takes all 8 cores to 100% it will lock in 2 seconds. If i run a benchmark that does that ramp up even slightly gradually then it does not lock and runs for hours like PIE. I have been working on the VDROOP adjustments trying to find the sweet spot between voltage and voltage flux. Other than that it has been rock solid.

  3. #2183
    ROG Guru: Yellow Belt Array
    Join Date
    Mar 2017
    Reputation
    13
    Posts
    194

    Quote Originally Posted by Clouseau View Post
    ^ 3600 is still a no go for most. But with UEFI 6004 have gotten the closest to getting a BCLK of 101 stable.

    Have always disabled Sense MI Skew. So therefore no temp. readout differences from previous versions with my 1700X
    Thank you for the info!!
    With 6001 i managed to get past the cold boot isseus with ram @3600 but system was unstable as .......

  4. #2184
    ROG Enthusiast Array Red Core PC Specs
    Red Core PC Specs
    MotherboardAsus ROG Crosshair VI Hero, AM4 Bios: 6201, 18.10b X370 driver, stable at these settings
    ProcessorAMD Ryzen 7 1800X: 4,025Ghz, 1,5V SMT:OFF 130Watt 73C
    Memory (part number)G.Skill 2x 16GB DDR4 Dualchannel 3000 CL14 1T 1,35V (F4-3000C14-16GVK)
    Graphics Card #1Asus ROG GTX 1080 Strix Advanced 2Ghz, 1.1V 200Watt 70°C 25db max 38% fan speed, driver: 398.82
    MonitorAsus ROG Swift PG348Q 3440x1440@100hz displayport 1.2, 25~30Watt G-sync On
    Storage #1Kingston KC1000 220gb M.2 SSD PCIE 3.0x4 2,77gb/s read, 0,9gb/s write, Windows only, boot time:18sec
    Storage #2930Gb Seagate barracuda HDD 3.5 inch 7200rpm Gaming & Data 15db (200mb/s read, 150mb/s write)
    CPU CoolerAlpenföhn Brocken Eco AM3 160Watt Tdp Direct heatpipes 20db 60% fan speed
    CaseIn Win 805 Black
    Power SupplyBequiet Dark Power Pro 11 1000Watt 10db 50% fan speed
    Keyboard Cherry, Black
    Mouse Cherry Gentix, Black
    Headset HyperX Cloud Alpha, impedance: 65, 27khz set to 32bit 192khz (ROG SupremeFX onboard) clean sound
    Mouse Pad Speedlink Atecs 1000 x 500mm (WxH)
    OS Windows 10 Home 64bit, O&O Shutup, No Cortana, GPUtweak
    Network Router1 Gbit/s but 200mbit/s download & 10mbit/s upload connection, 20~32ms ping
    Accessory #1 Phone: Huawei Mate 8
    Accessory #2 Hp Envy x360 13-ag0004ng + Hp Tilt Pen
    Red Core's Avatar
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    57

    Bios 6004, still 20C offset with a 1800X

    Quote Originally Posted by Clouseau View Post
    ^ 3600 is still a no go for most. But with UEFI 6004 have gotten the closest to getting a BCLK of 101 stable.

    Have always disabled Sense MI Skew. So therefore no temp. readout differences from previous versions with my 1700X
    In my case (1800X), if i disable or enable Sense MI Skew, the temperature stays same with an 20C offset.
    There is no way, that my cpu reachs 82C° at 4,025Ghz, if it reached before 54C° at 20min 100% load at 3,9Ghz.
    If its clocked now at 3,9Ghz it reach 74C°. At 82C°, the cooler would be at least warm, which it isnt. All checked, the cooler is installed right.
    In real it would reach arround 64C° which is just fine but with 82.. the fan keeps annoying and it cant be turned off.

  5. #2185
    ROG Enthusiast Array skline00 PC Specs
    skline00 PC Specs
    MotherboardAsus Rampage Extreme V/Asus C6H
    ProcessorIntel 5960x @ 4.4 Ghz with EK Supremacy EVO cpu block/Ryzen 2700x
    Memory (part number)Corsair DDR4-2400 -16 gigs (4x4)/Gskill FlareX DDR4-3200 16g (2x8)
    Graphics Card #1Gigabyte Extreme GTX1080TI+WB + EK block-5960x
    Graphics Card #2Zotac GTX 1080+EK Block-2700X
    MonitorAcer 430k-5960x/-Dell U3415W-2700x
    Storage #12 Samsung 850 EVO ssd 500g -5960x/Corsair MP500 Force 480g NVMe 2280-2700x
    Storage #2WB Black 2 TB-5960x/ Crucial 240g ssd-2700x
    CPU CoolerEK Supremacy EVO block-5960x/EK AM4 EVO Supremacy-2700x
    CaseThermaltake Core X9/Thermaltake V51
    Power SupplyPC P&C 1200 W Silencer Mk III/EVGA 850W
    Keyboard CM Quik Fire Rapid Mechanical
    Mouse Logitech G502
    Headset Kingston HyperX Cloud II
    Headset/Speakers Kingston HyperX Cloud II
    OS Win 10- 64 Home both
    Accessory #1 3- 480 radiators -XSPC RX480 v3-5960x/2-360 MagicCool slim radiators-2700x
    Accessory #2 12 AP15 GT fans in push mode-5960x/6 XSPC 120mm 1600rpm fans in push mode-2700x
    Accessory #3 XSPC Twin D5 bay res D5s in series-5960x/EK D5vario -140 pump/rad combo-2700x

    Join Date
    Sep 2012
    Reputation
    10
    Posts
    45

    My 2700x with the 6004 BIOS on my CH6H is working fine.
    5960x-4.4 EK EVO SPR|AsusRE5|16g DDR4-2400|Gigabyte Aorus Extr GTX1080TI+WB|2 Smsng 850 EVO 500gb ssds|2Tb WD Blk|Win10-64|PC P&C 1200W|Thrmltake X9|3 XSPC RX480 rads+ 2 D5s| Acer ET430k
    2700x-PBO-EK AM4 EVO |AsusC6H16g DDR4-3200 FlareX|Zotac GTX1080+EK WB|Corsair MP500-480gNVMe PCIe3|Win10-64|EVGA 850W|ThermaltakeV51|2 360 slim rads + EK D5 vario 140|Dell U3415W

  6. #2186
    ROG Junior Member Array
    Join Date
    Apr 2018
    Reputation
    10
    Posts
    2

    Quote Originally Posted by RobrPatty View Post
    anything above 1701 should fix boot bug.
    Thanks, installed 6004 yesterday. Seems to work fine so far.

  7. #2187
    ROG Enthusiast Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    46

    Quote Originally Posted by darkvader75 View Post
    I had the same event and found a bent pin hiding on the 2700X. Like a surgeon I corrected it and it now boots fine. The only issue I have on the 6004 bios is bad temp readings for the CPU in 3rd party software like CAM. When I run the AMD RyzenMaster software or look in the bios the CPU temperatures are normal. I am getting 80-105C in CAM and other software. However the CPU is reacting as if the bios and ryzenmaster are correct. I have been able to overclock it to 4400mhz on all cores however it is very sensitive to extreme voltage draw. For example, when I run a benchmark that instantly takes all 8 cores to 100% it will lock in 2 seconds. If i run a benchmark that does that ramp up even slightly gradually then it does not lock and runs for hours like PIE. I have been working on the VDROOP adjustments trying to find the sweet spot between voltage and voltage flux. Other than that it has been rock solid.
    Damn not sure what to do. Just looked over 2700X and there is no bent pin. But thanks for the input.

  8. #2188
    ROG Junior Member Array
    Join Date
    Jun 2017
    Reputation
    10
    Posts
    2

    Bios 6004: now i can run my Corsair Dominator Platinum 64gb(4x16) ver 4.31 at 3200mhz(normal speed) stable at 98% whit auto timmings, before the maximum reached possible was 2933 using the 4 dimms. if you have a gskill bdie you can try... maybe reach 3600mhz or more stable is possible?

    i own a Crosshair VI Extreme and a 1800x

  9. #2189
    ROG Member Array
    Join Date
    Feb 2018
    Reputation
    10
    Posts
    16

    Memory stability on AMD Ryzen is a unicorn.

    https://www.youtube.com/watch?v=KPclvLGx99w

  10. #2190
    ROG Enthusiast Array HnS-CHH PC Specs
    HnS-CHH PC Specs
    MotherboardCrosshair VI Hero
    ProcessorRyzen 7 2700x
    Memory (part number)F4-3600C15D-16GTZ
    Graphics Card #1Nvidia Geforce RTX 2080 FE
    Sound CardBurson Audio Playmate
    MonitorAcer Predator x27
    Storage #1Samsung 860 Evo 500gb
    Storage #2Samsung 840 Evo 1tb
    CPU CoolerEK-MLC Phoenix 360
    CaseFractal Design R6
    Power SupplySeasonic Prime Ultra 1000W
    Keyboard Logitech G Pro
    Mouse Logitech G900
    Headset Sennheiser HD800
    Mouse Pad Zowie G-SR-SE
    OS Windows 10 Pro

    Join Date
    Dec 2013
    Reputation
    10
    Posts
    40

    Got a new 2700x I must say that UA 1807SUS perform worst than 1803SUS. Need 1.375 voltage for 4.1ghz though with cpu usage drop one time toward 15-20 %, Is that a sign of unstable OC? I have done many test with 1803SUS, if there lot of cpu drop usage there is high chance pc end up freezing .

    I am thinking about getting silicon lottery one. Anyone has experience how much time it takes to Netherland adress?

    Edit: What is up with 4.2ghz max??

    Anyway can't complain if they highlight 30 more dollar my guts telling if using luck in Dutch shop I will receive bad sample. Means people doing on purpose.
    Last edited by HnS-CHH; 04-29-2018 at 05:06 PM.

Page 219 of 267 FirstFirst ... 119 169 209 217 218 219 220 221 229 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •