Page 69 of 267 FirstFirst ... 19 59 67 68 69 70 71 79 119 169 ... LastLast
Results 681 to 690 of 2664
  1. #681
    Administrator Array Silent Scone@ASUS's Avatar
    Join Date
    Mar 2016
    Reputation
    124
    Posts
    1,804

    Quote Originally Posted by syldon View Post
    Something is definitely closer to the mark with my memory CMU32GX4M2C3200C16B. while using 1401 revision I could not get above 2933. With 1403 I can get 3066 ( or whatever it is above 2933). But to do this I had to run with PROodt 96 which I think caused a heat issue. Nothing showed up on temp warnings, but windows shut down with errors after 3 hours of gaming use.

    I will stick with 1403 as it is no different in speed to 1401 for me. CPU z tests comeback near enough the same.
    Adjusting ProcODT can cause instability but not due to temperature

  2. #682
    ROG Member Array
    Join Date
    Apr 2017
    Reputation
    10
    Posts
    22

    Can someone tell me why it is not possible to flash back the BIOS to an older version?
    My board is Rev 1.03 and came with 1002. I flashed the UEFI 1401 Beta BIOS to this board. Everything works fine except of wrong showing temperatures and voltages. So I wanted to test 1201 or 1002. But every time the flash tool inside the BIOS tells me that these are not proper BIOS files. I don't know if it would work with the flash back feature but I don't wanna brick my board. With my old C6H board is was possible to flash back to older BIOS versions. I can only flash to 1403. And with this version I have the same issues like before. Shows me a CPU temperature of 18 degrees Celsius and my vcore voltage and dram voltage do not get higher than 1.308V.

    With 1403 I get the message "EVALUATION VERSION" at each boot now.
    Last edited by LIFE_; 06-27-2017 at 11:19 PM.

  3. #683
    ROG Guru: Yellow Belt Array Clouseau PC Specs
    Clouseau PC Specs
    MotherboardROG STRIX X470-F GAMING
    Processor3800X @ PE lvl3
    Memory (part number)F4-3600C16D-16GTZ @ 3600
    Graphics Card #1ROG STRIX OC GTX 1080
    MonitorSamsung C27HG70
    Storage #1Samsung 960 EVO
    Storage #2Samsung 850 EVO
    CPU CoolerNoctua NH-D15 SE-AM4
    CaseThermaltake Core X9
    Power SupplySeasonic Prime SSR-1200PD
    OS Windows 10 Pro RS4(1903)
    Clouseau's Avatar
    Join Date
    Jun 2017
    Reputation
    10
    Posts
    146

    Quote Originally Posted by LIFE_ View Post
    Can someone tell me why it is not possible to flash back the BIOS to an older version?
    My board is Rev 1.03 and came with 1002. I flashed the UEFI 1401 Beta BIOS to this board. Everything works fine except of wrong showing temperatures and voltages. So I wanted to test 1201 or 1002. But every time the flash tool inside the BIOS tells me that these are not proper BIOS files. I don't know if it would work with the flash back feature but I don't wanna brick my board. With my old C6H board is was possible to flash back to older BIOS versions. I can only flash to 1403. And with this version I have the same issues like before. Shows me a CPU temperature of 18 degrees Celsius and my vcore voltage and dram voltage do not get higher than 1.308V.

    With 1403 I get the message "EVALUATION VERSION" at each boot now.
    It is still possible to flash back to an older bios. The bios flash back button needs to be used for that. Just place the bios to flash back to on a USB stick and rename it C6H.CAP. Do not use the renaming tool; does not work. Just F2 and type in C6H and then enter.

  4. #684
    ROG Enthusiast Array
    Join Date
    Sep 2016
    Reputation
    10
    Posts
    51

    Quote Originally Posted by Silent Scone View Post
    Adjusting ProcODT can cause instability but not due to temperature
    So it seems that everyone with this RAM (Me too, I have same model) is stuck at 2933Mhz until new BIOS may possible solve this issue.

  5. #685
    ROG Enthusiast Array
    Join Date
    Sep 2016
    Reputation
    10
    Posts
    51

    Also, I noticed that you cannot disable CSM in BIOS. If you do, you will boot back into BIOS. With previous versions you could do that to save few seconds of boot time but with this BIOS you can't. Just FYI.

  6. #686
    ROG Guru: Yellow Belt Array syldon PC Specs
    syldon PC Specs
    MotherboardAsus crosshair VII
    Processor2700X
    Memory (part number)G.Skill Trident Z 32GB DDR4 F4-4000C18Q-32GTZKW running at 3466 14-14-14-28
    Graphics Card #1MSI 1080
    Graphics Card #2MSI 1080
    Sound Cardon board
    MonitorAsus PB287Q X 2
    Storage #1480gb M2 samsung m961
    Storage #21tb 850 evo and 2tb 850 evo
    CPU Coolercorsair hydro 110i
    Casegeneric
    Power Supplytitanium 1600w platinum
    Keyboard corsair strafe
    Mouse logitech g700
    Headset logitech g930
    Mouse Pad corsair duo
    OS Windows 10 po
    Network RouterVirgin media super hub 2
    Accessory #1 https://imgur.com/KRQSu70
    syldon's Avatar
    Join Date
    Nov 2013
    Reputation
    12
    Posts
    198

    Quote Originally Posted by Silent Scone View Post
    Adjusting ProcODT can cause instability but not due to temperature
    96 is the highest recommended by Asus.

    However Robert Halleck from AMD said that any thing above 80 will require super cooling technics. The heat spreader was warm but not overly so. Obviously the base was a lot hotter, I think in this case temp was the issue. I have reverted back now so it wont be an issue anymore. I have ran on a previous revision at 96 PROodt, and it ran fine for a few weeks.


    Quote Originally Posted by TheNaitsyrk View Post
    Also, I noticed that you cannot disable CSM in BIOS. If you do, you will boot back into BIOS. With previous versions you could do that to save few seconds of boot time but with this BIOS you can't. Just FYI.
    I have CSM disabled without any issues.

  7. #687
    ROG Member Array Monochrome PC Specs
    Monochrome PC Specs
    MotherboardAsus Crosshair VI Hero
    ProcessorR7 1800X
    Memory (part number)F4-3200C16Q-16GVKB
    Graphics Card #1Sapphire Nitro Fury
    MonitorLG 34UC88
    CPU CoolerRaijintek Triton
    Monochrome's Avatar
    Join Date
    Jun 2017
    Reputation
    10
    Posts
    11

    Quote Originally Posted by LIFE_ View Post
    With 1403 I get the message "EVALUATION VERSION" at each boot now.
    I have it as well but I had it since I bought the board. So also on previous bios versions.

  8. #688
    ROG Member Array
    Join Date
    Mar 2017
    Reputation
    10
    Posts
    10

    Quote Originally Posted by syldon View Post
    Something is definitely closer to the mark with my memory CMU32GX4M2C3200C16B. while using 1401 revision I could not get above 2933. With 1403 I can get 3066 ( or whatever it is above 2933). But to do this I had to run with PROodt 96 which I think caused a heat issue. Nothing showed up on temp warnings, but windows shut down with errors after 3 hours of gaming use.

    I will stick with 1403 as it is no different in speed to 1401 for me. CPU z tests comeback near enough the same.
    Using the same RAM here, alas also stuck on 2933.

  9. #689
    ROG Enthusiast Array
    Join Date
    Nov 2015
    Reputation
    10
    Posts
    50

    just really want to know how i would notice if one is better than the other.

  10. #690
    ROG Guru: Yellow Belt Array
    Join Date
    Apr 2013
    Reputation
    17
    Posts
    142

    I bought some 3466mhz rated b-die to see if I could run it @3466mhz the same as the 4266mhz trident I already own. thought it could save a few people some money. only its taken over a month to reach its destination. worst delivery ever...hopefully it will be here tomorrow. my system hass had no cold boot issues. I'm very happy with the systems stability now. id be happy to build a pc based on this chipset for a customer and feel safe knowing the system will be stable. well done with this bios.

    edit. rgb issues are all sorted aswell. no more corrupting ram spd's.
    AsusCrosshairVIHero - 2700x@4.30Ghz~1.373v
    32Gb G.Skill RGB Trident 16gb3466Mhz + 16gb4266Mhz DDR4@3466mhz
    Titan Xp
    1TbSamsung960EVO M.2 1TbSamsung850EVO SSD Seagate2TB/3Tb CorsairForceGt 64gb
    TTtoughpower1200w80
    Thermaltake Core X71 Tempered glass side panal

Page 69 of 267 FirstFirst ... 19 59 67 68 69 70 71 79 119 169 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •