Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Clocking Ram help

Jclark919
Level 7

‎03-20-2017 05:20 PM - last edited on ‎03-05-2024 10:40 PM by Community Admin

Hey guys im trying to get my memory to 2400mhz which is what it is rated for.. But every time i move it from stock 2133 to 2400 the computer wont start and i get overclocked failed.

this is my system stats
http://www.userbenchmark.com/UserRun/3170295

i have no problem clocking my processor to 3.8ghz
But i fail every time with RAM. I have tried the EZ mode in the bios as well as the over clocking wizard thing in the bios
Labels:
0 Kudos
1,793 Views
3 REPLIES 3

Zka17
Level 16

‎03-21-2017 01:04 AM

Have you tried in Advanced Mode - choose XMP?

Do you have a single kit or mixed different ones? (even if you have two identical kits, those may be different in sub-timings)
Based on that link you provided: 48GB of RAM certainly isn't a single kit... - there can hide a problem...

Choose a SINGLE kit from the motherboard's QVL (you can find it on Asus website)
0 Kudos

Jclark919
Level 7
In response to Zka17

‎03-21-2017 08:52 AM

it was 1 kit of 32G 4x8 and a kit of 16gb 2x8 everything is exactly the same

And yha i tried advanced still nothing with it

will take out the second kit of 16 and try jsut the 4x8
0 Kudos

Zka17
Level 16
In response to Jclark919

‎03-21-2017 01:09 PM

Jclark919 wrote:
everything is exactly the same
- it is not!

Those parameters you see when buying the kits are just half of the story... you are welcome to do some readings on it, or just simply believe me...

Leave just one of the kits, make sure that the sticks are in the DIMMs suggested by your manual... then try it again...
0 Kudos